29 #define ubi_msg(fmt, ...) printf("UBI: " fmt "\n", ##__VA_ARGS__)
121 		printf("No space left in UBI device!\n");  in verify_mkvol_req()
138 		printf("Name too long!\n");  in verify_mkvol_req()
169 		printf("verify_mkvol_req failed %d\n", err);  in ubi_create_vol()
172 	printf("Creating %s volume %s of size %lld\n",  in ubi_create_vol()
189 	printf("Volume %s not found!\n", volume);  in ubi_find_volume()
202 	printf("Remove UBI volume %s (id %d)\n", vol->name, vol->vol_id);  in ubi_remove_vol()
205 		printf("It's read-only mode\n");  in ubi_remove_vol()
212 		printf("Error changing Vol tabel record err=%x\n", err);  in ubi_remove_vol()
258 		printf("Couldnt or partially wrote data\n");  in ubi_volume_continue_write()
295 		printf("size > volume size! Aborting!\n");  in ubi_volume_begin_write()
301 		printf("Cannot start volume update\n");  in ubi_volume_begin_write()
327 		printf("updating");  in ubi_volume_read()
331 		printf("damaged volume, update marker is set");  in ubi_volume_read()
338 		printf("No size specified -> Using max size (%lld)\n", vol->used_bytes);  in ubi_volume_read()
342 	printf("Read %zu bytes from volume %s to %p\n", size, volume, buf);  in ubi_volume_read()
345 		printf("read from corrupted volume %d", vol->vol_id);  in ubi_volume_read()
354 		printf("NO MEM\n");  in ubi_volume_read()
369 			printf("read err %x\n", err);  in ubi_volume_read()
450 		printf("Partition %s not found!\n", part_name);  in ubi_part()
457 		printf("UBI init error %d\n", err);  in ubi_part()
458 		printf("Please check, if the correct MTD partition is used (size big enough?)\n");  in ubi_part()
484 				printf("Error, no UBI device selected!\n");  in do_ubi()
488 			printf("Device %d: %s, MTD partition %s\n",  in do_ubi()
503 		printf("Error, no UBI device selected!\n");  in do_ubi()
518 		printf("Error, no volume name passed\n");  in do_ubi()
540 				printf("Incorrect type\n");  in do_ubi()
554 			printf("No size specified -> Using max size (%lld)\n", size);  in do_ubi()
571 			printf("Please see usage\n");  in do_ubi()
593 			printf("%lld bytes written to volume %s\n", size,  in do_ubi()
620 	printf("Please see usage\n");  in do_ubi()