Lines Matching refs:PHY_1ch

632         eng->phy.PHY_1ch = phy_read( eng, 28 );  in phy_marvell3()
634                 if ( ( eng->phy.PHY_1ch & 0x0c00 ) != 0x0000 ) {  in phy_marvell3()
635 …g] Register 28, bit 10~11 must be 0 (RGMIIRX Edge-align Mode)[Reg1ch:%04x]\n\n", eng->phy.PHY_1ch);  in phy_marvell3()
636                         eng->phy.PHY_1ch = ( eng->phy.PHY_1ch & 0xf3ff ) | 0x0000;  in phy_marvell3()
637                         phy_write( eng, 28, eng->phy.PHY_1ch );  in phy_marvell3()
640                 if ( ( eng->phy.PHY_1ch & 0x0c00 ) != 0x0800 ) {  in phy_marvell3()
641 …f("\n\n[Warning] Register 28, bit 10~11 must be 2 (RMII Mode)[Reg1ch:%04x]\n\n", eng->phy.PHY_1ch);  in phy_marvell3()
642                         eng->phy.PHY_1ch = ( eng->phy.PHY_1ch & 0xf3ff ) | 0x0800;  in phy_marvell3()
643                         phy_write( eng, 28, eng->phy.PHY_1ch );  in phy_marvell3()
742 	eng->phy.PHY_1ch = phy_read(eng, 0x1c);  in phy_broadcom0()
743 	PHY_new = eng->phy.PHY_1ch & ~((0x1f << 10) | BIT(9));  in phy_broadcom0()