Lines Matching refs:printf
135 printf("%20s| 0: NCSI configuration with " in print_arg_test_mode()
137 printf("%20s| (default:%3d)\n", "", DEF_GTESTMODE); in print_arg_test_mode()
138 printf("%20s| 1: TX/RX delay scan\n", ""); in print_arg_test_mode()
139 printf("%20s| 2: TX/RX delay and IO driving scan\n", ""); in print_arg_test_mode()
140 printf("%20s| 3: NCSI configuration without " in print_arg_test_mode()
143 printf("%20s| (default:%3d)\n", item, DEF_GTESTMODE); in print_arg_test_mode()
144 printf("%20s| 0: TX/RX delay margin check\n", ""); in print_arg_test_mode()
145 printf("%20s| 1: TX/RX delay scan\n", ""); in print_arg_test_mode()
146 printf("%20s| 2: TX/RX delay and IO driving scan\n", ""); in print_arg_test_mode()
147 printf("%20s| 3: TX frame - ARP\n", ""); in print_arg_test_mode()
148 printf("%20s| 4: TX frame - random\n", ""); in print_arg_test_mode()
149 printf("%20s| 5: TX frame - user defined (default:0x%8x)\n", "", in print_arg_test_mode()
158 printf("%20s| 0~31: PHY Address (default:%d)\n", item, DEF_GPHY_ADR); in print_arg_phy_addr()
165 printf("%20s| 0/1/2 (default:0) only for test_mode 3,4,5)\n", item); in print_arg_ieee_select()
172 printf("%20s| 1/2/3/... (default:%d) only for test_mode 0\n", item, in print_arg_delay_scan_range()
174 printf("%20s| check range = (orig - margin) ~ (orig + margin)\n", ""); in print_arg_delay_scan_range()
181 printf("%20s| 1~32: Total Number of NCSI Channel (default:%d)\n", item, in print_arg_channel_num()
189 printf("%20s| 1~ 8: Total Number of NCSI Package (default:%d)\n", item, in print_arg_package_num()
197 printf("%20s| 1G : (default:%3d)\n", item, DEF_GLOOP_MAX * 20); in print_arg_loop()
198 printf("%20s| 100M: (default:%3d)\n", "", DEF_GLOOP_MAX * 2); in print_arg_loop()
199 printf("%20s| 10M : (default:%3d)\n", "", DEF_GLOOP_MAX); in print_arg_loop()
206 printf("%20s| default : 0x%03x\n", item, DEF_GCTRL); in print_arg_ctrl()
207 printf("%20s| bit0 : skip PHY init/deinit\n", ""); in print_arg_ctrl()
208 printf("%20s| bit1 : skip PHY deinit\n", ""); in print_arg_ctrl()
209 printf("%20s| bit2 : skip PHY ID check\n", ""); in print_arg_ctrl()
210 printf("%20s| bit3 : reserved\n", ""); in print_arg_ctrl()
211 printf("%20s| bit4 : PHY internal loopback\n", ""); in print_arg_ctrl()
212 printf("%20s| bit5 : MAC internal loopback\n", ""); in print_arg_ctrl()
213 printf("%20s| bit6 : Enable PHY RX delay\n", ""); in print_arg_ctrl()
214 printf("%20s| bit7 : Enable PHY TX delay\n", ""); in print_arg_ctrl()
215 printf("%20s| bit8 : RMII 50MHz Output enable\n", ""); in print_arg_ctrl()
216 printf("%20s| bit9 : RMII REFCLK pin input enable\n", ""); in print_arg_ctrl()
217 printf("%20s| bit10 : inverse RGMII RXCLK\n", ""); in print_arg_ctrl()
218 printf("%20s| bit11 : reserved\n", ""); in print_arg_ctrl()
219 printf("%20s| bit12 : TX single packet for each test point\n", ""); in print_arg_ctrl()
220 printf("%20s| bit13 : full range scan\n", ""); in print_arg_ctrl()
221 printf("%20s| bit15~14 : reserved\n", ""); in print_arg_ctrl()
222 printf("%20s| bit16 : NCSI verbose log\n", ""); in print_arg_ctrl()
223 printf("%20s| bit17 : NCSI skip RX error\n", ""); in print_arg_ctrl()
224 printf("%20s| bit31~18 : reserved\n", ""); in print_arg_ctrl()
231 printf("%20s| bit[0]->1G bit[1]->100M bit[2]->10M " in print_arg_speed()
240 printf("%20s| 0->MDIO1 1->MDIO2", item); in print_arg_mdio_idx()
243 printf(" 2->MDIO3 3->MDIO4"); in print_arg_mdio_idx()
245 printf("\n"); in print_arg_mdio_idx()
252 printf("%20s| 0->MAC1 1->MAC2", item); in print_arg_mac_idx()
255 printf(" 2->MAC3 3->MAC4"); in print_arg_mac_idx()
257 printf("\n"); in print_arg_mac_idx()
261 printf("Legend:\n"); in print_legend()
262 printf(" o : OK\n"); in print_legend()
263 printf(" x : CRC error\n"); in print_legend()
264 printf(" . : packet not found\n"); in print_legend()
265 printf(" System default setting\n"); in print_legend()
266 printf(" O : OK\n"); in print_legend()
267 printf(" X : CRC error\n"); in print_legend()
268 printf(" * : packet not found\n"); in print_legend()
273 printf("mactest <mac_idx> <mdio_idx> <speed> <ctrl> <loop_max> <test " in print_usage()
285 printf("ncsitest <idx> <packet num> <channel num> <test mode> " in print_usage()
294 printf("unknown run mode\n"); in print_usage()
368 printf("flags: error = %08x\n", p_eng->flg.error); in finish_check()
417 printf("Error test_mode!!!\n"); in check_test_mode()
445 printf("Error test_mode!!!\n"); in check_test_mode()
585 printf("%s:undefined MDIO idx %d\n", __func__, in scu_set_pinmux()
642 printf("invalid run_idx = %d\n", p_eng->arg.mac_idx); in check_mac_idx()
698 printf("\nNCSI must runs on MAC#3 or MAC#4\n"); in setup_running()
705 printf("\nNCSI must be RMII interface, force the strap value:\n"); in setup_running()
706 printf("\nbefore: SCU510=%08x\n", SCU_RD(0x510)); in setup_running()
715 printf("\nafter: SCU510=%08x\n", SCU_RD(0x510)); in setup_running()
722 printf("\nNCSI must be RMII interface\n"); in setup_running()
756 printf("Error phy_adr!!!\n"); in setup_running()
794 printf("Error IO margin!!!\n"); in setup_running()
878 printf("CheckBuf_MBSize : %d\n", in setup_running()
880 printf("LOOP_CheckNum : %d\n", in setup_running()
882 printf("Des_Num : %d\n", p_eng->dat.Des_Num); in setup_running()
883 printf("DMA_BufSize : %d bytes\n", in setup_running()
885 printf("DMA_BufNum : %d\n", p_eng->dat.DMABuf_Num); in setup_running()
886 printf("DMA_PakSize : %d\n", DMA_PakSize); in setup_running()
887 printf("\n"); in setup_running()
953 printf("chip: AST2600 A%d\n", version); in setup_chip_compatibility()
963 printf("chip: AST2500 A%d\n", version); in setup_chip_compatibility()
972 printf("unknown chip\n"); in setup_chip_compatibility()
1122 printf("test mode = %d\n", p_eng->arg.test_mode); in parse_arg_dedicated()
1128 printf("loop max=%d, loop_inf=%d\n", p_eng->arg.loop_max, p_eng->arg.loop_inf); in parse_arg_dedicated()
1131 printf("ctrl=0x%05x\n", p_eng->arg.ctrl.w); in parse_arg_dedicated()
1134 printf("speed=0x%1x\n", p_eng->arg.run_speed); in parse_arg_dedicated()
1137 printf("mdio_idx=%d\n", p_eng->arg.mdio_idx); in parse_arg_dedicated()
1355 printf("\n"); in test_start()
1410 printf("===================\n"); in dump_setting()
1411 printf("ast2600 compatible = %d\n", p_eng->env.ast2600); in dump_setting()
1412 printf("ast2500 compatible = %d\n", p_eng->env.ast2500); in dump_setting()
1413 printf("valid MAC number = %d\n", p_eng->env.mac_num); in dump_setting()
1414 printf("use new MDIO register = %d %d %d %d\n", in dump_setting()
1419 printf("1G compatible = %d %d %d %d\n", in dump_setting()
1424 printf("===================\n"); in dump_setting()
1428 printf("RGMIICK of MAC1/2 = %d Hz\n", ring_clk(0x320, 0xf)); in dump_setting()
1429 printf("RGMIICK of MAC3/4 = %d Hz\n", ring_clk(0x330, 0x9)); in dump_setting()
1430 printf("EPLL = %d Hz\n", ring_clk(0x320, 0x5) * 4); in dump_setting()
1431 printf("HCLK = %d Hz\n", ring_clk(0x330, 0x1)); in dump_setting()
1446 printf("init MAC engine fail\n"); in mac_test()