Lines Matching refs:printf
49 #define DBG(Level, format, args...) if ((Level) & DBG_LEVEL) printf(format, ##args)
111 printf("DBG_LEVEL change into 0x%x\n", DBG_LEVEL); in do_ast_dptest()
117 printf("I2C_PORT change into 0x%x\n", I2C_PORT); in do_ast_dptest()
126 printf("ASPEED DP Physical Layer Test Tool V %d.%d.%d\n", MAINVER, SUBVER, TEMPVER); in do_ast_dptest()
128 printf("Internal Version\n"); in do_ast_dptest()
131 printf("Build Date: %d.%d.%d\n\n", YEAR, MONTH, DAY); in do_ast_dptest()
133 printf("PLEASE REFER USER MANUAL BEFORE TEST!!\n\n"); in do_ast_dptest()
137 printf("DP TX MCU Initial Done!\n"); in do_ast_dptest()
141 printf("DP Physcial Config Done!\n"); in do_ast_dptest()
143 printf("Commands as below:\n"); in do_ast_dptest()
144 printf("0: Change SSC on/off\n"); in do_ast_dptest()
145 printf("1: Set data rate 1.62\n"); in do_ast_dptest()
146 printf("2: Set data rate 2.7\n"); in do_ast_dptest()
148 printf("3: DE_LVL = 1, DE_LVL_1 = 2\n"); in do_ast_dptest()
149 printf("4: DE_LVL = 0, DE_LVL_1 = 0\n"); in do_ast_dptest()
150 printf("5: DE_LVL = 2, DE_LVL_1 = 1\n"); in do_ast_dptest()
152 printf("6: SSC shift -80ppm\n"); in do_ast_dptest()
153 printf("7: SSC shift -120ppm\n"); in do_ast_dptest()
154 printf("!: Show configs\n\n"); in do_ast_dptest()
156 printf("TestItems as below:\n"); in do_ast_dptest()
157 printf("x: auto test\n"); in do_ast_dptest()
158 printf("a: PRBS7\n"); in do_ast_dptest()
159 printf("g: D10.2\n"); in do_ast_dptest()
160 printf("Press ESC key to leave test ...\n\n"); in do_ast_dptest()
224 printf("The parameter is applied next measure!\n"); in do_ast_dptest()
228 printf("Measurement is executed!\n"); in do_ast_dptest()
230 printf("Measurement is stopped!\n"); in do_ast_dptest()
244 printf("Apply SSCG into current measurement !\n\n"); in do_ast_dptest()
254 printf("'ESC' is pressed!\n"); in do_ast_dptest()
263 printf("Stop current measurement !\n\n\n\n\n\n"); in do_ast_dptest()
302 printf("Change the Swing value from request\n"); in do_ast_dptest()
307 printf("Change the Swing value from request\n"); in do_ast_dptest()
320 printf("Non - define command!\n"); in do_ast_dptest()
330 printf("######################################\n"); in do_ast_dptest()
331 printf("#Current DP TX setting is shown below#\n"); in do_ast_dptest()
332 printf("######################################\n\n"); in do_ast_dptest()
337 printf("#########################\n"); in do_ast_dptest()
338 printf("#Enter DP TX Auto Test!!#\n"); in do_ast_dptest()
339 printf("#########################\n\n"); in do_ast_dptest()
345 printf("#########################\n"); in do_ast_dptest()
346 printf("#Leave DP TX Auto Test!!#\n"); in do_ast_dptest()
347 printf("#########################\n\n"); in do_ast_dptest()
358 printf("\n\n"); in do_ast_dptest()
1179 printf("DP HPD irq is detected!\n"); in Apply_Auto_Mesument()
1184 printf("DP HPD event is detected!\n"); in Apply_Auto_Mesument()
1195 printf("'ESC' is pressed under auto test!\n\n"); in Apply_Auto_Mesument()
1199 printf("DP TX auto test is executed!\n"); in Apply_Auto_Mesument()
1237 printf("SSC isn't on for pattern other than D10.2\n"); in Apply_Main_Mesument()
1277 printf("RD_VAL is 0x%x\n", RD_VAL); in Set_Redriver()
1282 printf("value0 is 0x%x\n", value); in Set_Redriver()
1285 printf("value1 is 0x%x\n", value); in Set_Redriver()
1370 printf("######################################\n"); in DPPHYTX_Show_Cfg()
1371 printf("#Current DP TX setting is shown below#\n"); in DPPHYTX_Show_Cfg()
1372 printf("######################################\n\n"); in DPPHYTX_Show_Cfg()
1391 printf("DP Rate\n"); in DPPHYTX_Show_Cfg()
1420 printf("Deemphasis Level\n"); in DPPHYTX_Show_Cfg()
1440 printf("Swing Level\n"); in DPPHYTX_Show_Cfg()
1452 printf("SSC shift -%d ppm\n", SSC_SHIFT * 40); in DPPHYTX_Show_Cfg()
1461 printf("SSCG\n"); in DPPHYTX_Show_Cfg()
1467 printf("\n"); in DPPHYTX_Show_Cfg()
1523 printf("\n"); in DPPHYTX_Show_Item()