Lines Matching full:provides
7 Enable U-Boot's command-line functions. This provides a means
126 Setting this variable provides an escape sequence from the
162 command. This provides information of which options are enabled on
321 This provides the offset of the command line arguments for Linux
331 This provides the size of the command-line argument area in NAND
461 Provides commands to read and write EEPROM (Electrically Erasable
659 Provides a 'demo' command which can be used to play around with
680 Provides access to driver model data structures and information,
762 Provides a way to dump FPGA registers by calling the board-specific
808 Provides an 'ide' command which allows accessing the IDE drive,
816 Provides an 'iod' command to display I/O space and an 'iow' command
824 Provides an 'iotrace' command which supports recording I/O reads and
840 the access pattern should not change, the checksum provides assurance
940 Provides a way to set up an MMC (Multimedia Card) SPI (Serial
941 Peripheral Interface) device. The device provides a means of
949 OneNAND is a brand of NAND ('Not AND' gate) flash which provides
951 and erasing blocks. It allso provides a way to show and change
981 Provides a means to initialise a PCMCIA (Personal Computer Memory
1002 Provides low-level access to the data in a partition.
1016 This command provides information about attached devices and allows
1026 Provides a way to save a binary file using the Motorola S-Record
1033 This provides a 'scsi' command which provides access to SCSI (Small
1034 Computer System Interface) devices. The command provides a way to
1041 Provides information about attached SDRAM. This assumed that the
1053 Provides a way to test that SPI flash is working correctly. The
1079 This provides various sub-commands to initialise and configure the
1375 This provides a way to obtain information about a BMP-format iamge
1397 option provides a way to control this. The commands that are enabled
1452 Enable the 'efidebug' command which provides a subset of UEFI
1484 milliseconds. See also the 'bootstage' command which provides more
1497 This provides an option to brinup
1510 This provides basic access to the U-Boot's sound support. The main
1520 This provides access to the QEMU firmware interface. The main
1527 bool "terminal - provides a way to attach a serial terminal"
1529 Provides a 'cu'-like serial terminal command. This can be used to
1598 This provides a means to encrypt and decrypt data using the AES
1609 Freescale's SEC block has built-in Blob Protocol which provides
1612 which provides both confidentiality and integrity protection.
1652 This provides a way to hash data in memory using various supported
1690 This provides a means to talk to a TPM from the command line. A wide
1701 This provides a a series of tests to confirm that the TPMv1.x is
1718 Controller). This provides the 'crosec' command which has
1749 This provides commands for dealing with CRAMFS (Compressed ROM
1838 This provides two commands which operate on a resierfs filesystem,
1849 This provides commands for accessing a YAFFS2 filesystem. Yet
1858 This provides commands to accessing a ZFS filesystem, commonly used
1873 The bedbug (emBEDded deBUGger) command provides debugging features
1880 This command provides access to board diagnostic tests. These are
1907 This provides access to logging features. It allows the output of
1909 maximum log level for emitting of records). It also provides access
1946 flash chips like wear and bad blocks and provides some other useful