Lines Matching +full:clkdiv +full:- +full:-
1 // SPDX-License-Identifier: GPL-2.0+
46 out_be32(&ecm->eedr, 0xffffffff); /* clear ecm errors */ in checkboard()
47 out_be32(&ecm->eeer, 0xffffffff); /* enable ecm errors */ in checkboard()
60 uint clkdiv, lbc_mhz, lcrr = CONFIG_SYS_LBC_LCRR; in local_bus_init() local
66 clkdiv = sysinfo.freq_systembus / sysinfo.freq_localbus; in local_bus_init()
68 debug("LCRR=0x%x, CD=%d, MHz=%d\n", lcrr, clkdiv, lbc_mhz); in local_bus_init()
70 out_be32(&gur->lbiuiplldcr1, 0x00078080); in local_bus_init()
71 if (clkdiv == 16) { in local_bus_init()
72 out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0); in local_bus_init()
73 } else if (clkdiv == 8) { in local_bus_init()
74 out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0); in local_bus_init()
75 } else if (clkdiv == 4) { in local_bus_init()
76 out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0); in local_bus_init()
89 * According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30 in local_bus_init()
98 out_be32(&lbc->lcrr, lcrr); in local_bus_init()
105 lcrr = in_be32(&lbc->lcrr); in local_bus_init()
111 out_be32(&lbc->ltesr, 0xffffffff); /* Clear LBC error IRQs */ in local_bus_init()
112 out_be32(&lbc->lteir, 0xffffffff); /* Enable LBC error IRQs */ in local_bus_init()
140 out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); in lbc_sdram_init()
143 out_be32(&lbc->lsrt, CONFIG_SYS_LBC_LSRT); in lbc_sdram_init()
144 out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR); in lbc_sdram_init()
150 out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_PCHALL); in lbc_sdram_init()
162 out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_ARFRSH); in lbc_sdram_init()
172 * Issue 8 MODE-set command. in lbc_sdram_init()
174 out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_MRW); in lbc_sdram_init()
185 out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_RFEN); in lbc_sdram_init()
248 u32 devdisr = in_be32(&gur->devdisr); in pci_init_board()
249 u32 pordevsr = in_be32(&gur->pordevsr); in pci_init_board()
250 u32 porpllsr = in_be32(&gur->porpllsr); in pci_init_board()
263 pci_arb ? "arbiter" : "external-arbiter"); in pci_init_board()
279 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ in pci_init_board()
282 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable PCI2 */ in pci_init_board()