61 	 * set I2C addresses to default values  in adv7611_probe()
87 	 * IO_REG_02, default 0xf0  in adv7611_probe()
90 	 * default: 0b1111 auto  in adv7611_probe()
94 	 * default: 0 YPbPr color space output  in adv7611_probe()
100 	 * IO_REG_03, default 0x00  in adv7611_probe()
103 	 * default: 0x00 8-bit SDR ITU-656 mode  in adv7611_probe()
109 	 * IO_REG_05, default 0x2c  in adv7611_probe()
112 	 * default: 1 insert AV codes into data stream  in adv7611_probe()
118 	 * IO_REG_0C, default 0x62  in adv7611_probe()
121 	 * default: 1 chip is powered down  in adv7611_probe()
127 	 * IO_REG_15, default 0xbe  in adv7611_probe()
132 	 * default: 1 video output pins are tristate  in adv7611_probe()
138 	 * HDMI_REGISTER_02H, default 0xff  in adv7611_probe()
141 	 * default: 1 disable termination  in adv7611_probe()
146 	 * but at the moment this seems a safe default.  in adv7611_probe()
151 	 * HDMI_CP_CNTRL_1, default 0x01  in adv7611_probe()
154 	 * default: 1 Enable the free run feature in HDMI mode  in adv7611_probe()
160 	 * INT1_CONFIGURATION, default 0x20  in adv7611_probe()
163 	 * default: 00 Interrupt signal is active for 4 Xtal periods  in adv7611_probe()
167 	 * default: 00 Open drain  in adv7611_probe()