Lines Matching refs:SD
45 The Gateworks Ventana boards support booting from NAND or micro-SD depending
50 always boot from micro-SD. However, it is possible to use the U-Boot bmode
113 on the micro-SD (defined by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR).
116 U-Boot from a file on a FAT/EXT filesystem on the micro-SD, we chose to
117 use raw micro-SD access to keep the code-size and boot time of the SPL down.
143 The above assumes the default Ventana micro-SD partitioning scheme
163 depends on your boot medium (ie NAND Flash vs micro-SD) and size/storage
170 - micro-SD
249 4.2. Falcon Mode on micro-SD card
252 To prepare a Gateworks Ventana board with a primary boot device of micro-SD
256 For micro-SD based Falcon mode you must program your micro-SD such that
265 First you must prepare a micro-SD such that the SPL can be loaded by the
270 block storage device of your micro-SD):
290 Now that your micro-SD partitioning has been adjusted to leave room for the
291 raw 'args' and 'kernel' data boot the board with the prepared micro-SD, break