Lines Matching +full:1 +full:gbps
19 - Up to four 10 Gbps Ethernet MACs
20 - Up to eight 1 Gbps Ethernet MACs
21 - Up to four 2.5 Gbps Ethernet MACs
40 1G Ethernet numbers: 8 6
57 - Two 1Gbps RGMII on-board ports
58 - Four 10Gbps XFI on-board cages
59 - 1Gbps/2.5Gbps SGMII Riser card
60 - 10Gbps XAUI Riser card
89 - XFI is supported on T2080QDS through Lane A/B/C/D on Serdes 1 routed to
107 1000BASE-KX(1G-KX):
108 - T2080QDS can support 1G-KX by using SGMII protocol, but serdes lane
109 runs in 1G-KX mode. By default, the lane runs in SGMII mode, to set a lane
110 in 1G-KX mode, need to set corresponding bit in SerDes Protocol Configuration
111 Register 1 (PCCR1), and U-Boot fixup the dtb for kernel to do proper
113 Hwconfig "fsl_1gkx" is used to indicate a lane runs in 1G-KX mode, MAC
114 1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set a
115 MAC to use 1G-KX mode, set its' corresponding env in "fsl_1gkx", 'fm1_1g1'
116 stands for MAC 1, 'fm1_1g2' stands for MAC 2, etc.
118 hwconfig, MAC 1/2/5/6/9/10 will use 1G-KX mode.
130 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
138 0xC_0000_0000 0xC_1FFF_FFFF PCI Express 1 Mem Space 512MB
149 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
156 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB
164 1. NOR boot:
171 set SW1[1:8] = '00010011', SW2[1] = '1', SW6[1:4] = '0000' for NOR boot
176 by DIP-switch: set SW6[1:4] = '0100'
180 by DIP-Switch: set SW6[1:4] = '0000'
190 set SW1[1:8] = '10000010', SW2[1] = '0' and SW6[1:4] = '1001' for NAND boot
201 set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
212 set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
246 0x000000 0x0FFFFF U-Boot img 1MB (2 blocks)
247 0x100000 0x17FFFF U-Boot env 512KB (1 block)
248 0x180000 0x1FFFFF FMAN ucode 512KB (1 block)
254 0x008 2048 U-Boot img 1MB
262 0x000000 0x0FFFFF U-Boot img 1MB
279 1. NOR Boot
286 1. CONFIG_DEFAULT_DEVICE_TREE="t2080qds" (Change default device tree name if required)
292 1. use 'u-boot-with-dtb.bin' for NOR boot.