Lines Matching +full:bit +full:- +full:banged
4 TsiChung Liew(Tsi-Chung.Liew@freescale.com)
12 - board/freescale/m53017evb/m53017evb.c Dram setup
13 - board/freescale/m53017evb/mii.c Mii access
14 - board/freescale/m53017evb/Makefile Makefile
15 - board/freescale/m53017evb/config.mk config make
16 - board/freescale/m53017evb/u-boot.lds Linker description
18 - arch/m68k/cpu/mcf532x/cpu.c cpu specific code
19 - arch/m68k/cpu/mcf532x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs
20 - arch/m68k/cpu/mcf532x/interrupts.c cpu specific interrupt support
21 - arch/m68k/cpu/mcf532x/speed.c system, flexbus, and cpu clock
22 - arch/m68k/cpu/mcf532x/Makefile Makefile
23 - arch/m68k/cpu/mcf532x/config.mk config make
24 - arch/m68k/cpu/mcf532x/start.S start up assembly code
26 - doc/README.m53017evb This readme file
28 - drivers/net/mcffec.c ColdFire common FEC driver
29 - drivers/net/mcfmii.c ColdFire common Mii driver
30 - drivers/serial/mcfuart.c ColdFire common UART driver
31 - drivers/rtc/mcfrtc.c Realtime clock Driver
33 - include/asm-m68k/bitops.h Bit operation function export
34 - include/asm-m68k/byteorder.h Byte order functions
35 - include/asm-m68k/fec.h FEC structure and definition
36 - include/asm-m68k/fsl_i2c.h I2C structure and definition
37 - include/asm-m68k/global_data.h Global data structure
38 - include/asm-m68k/immap.h ColdFire specific header file and driver macros
39 - include/asm-m68k/immap_5301x.h mcf5301x specific header file
40 - include/asm-m68k/io.h io functions
41 - include/asm-m68k/m532x.h mcf5301x specific header file
42 - include/asm-m68k/posix_types.h Posix
43 - include/asm-m68k/processor.h header file
44 - include/asm-m68k/ptrace.h Exception structure
45 - include/asm-m68k/rtc.h Realtime clock header file
46 - include/asm-m68k/string.h String function export
47 - include/asm-m68k/timer.h Timer structure and definition
48 - include/asm-m68k/types.h Data types definition
49 - include/asm-m68k/uart.h Uart structure and definition
50 - include/asm-m68k/u-boot.h U-Boot structure
52 - include/configs/M53017EVB.h Board specific configuration file
54 - arch/m68k/lib/board.c board init function
55 - arch/m68k/lib/cache.c
56 - arch/m68k/lib/interrupts Coldfire common interrupt functions
57 - arch/m68k/lib/m68k_linux.c
58 - arch/m68k/lib/time.c Timer functions (Dma timer and PIT)
59 - arch/m68k/lib/traps.c Exception init code
63 1.1 pre-loader is no longer suppoer in thie coldfire family
66 CONFIG_MCF5301x -- define for all MCF5301x CPUs
67 CONFIG_M53015 -- define for MCF53015 CPUs
68 CONFIG_M53017EVB -- define for M53017EVB board
70 CONFIG_MCFUART -- define to use common CF Uart driver
71 CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
72 CONFIG_BAUDRATE -- define UART baudrate
74 CONFIG_MCFRTC -- define to use common CF RTC driver
75 CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
76 CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
77 RTC_DEBUG -- define to show RTC debug message
78 CONFIG_CMD_DATE -- enable to use date feature in U-Boot
80 CONFIG_MCFFEC -- define to use common CF FEC driver
81 CONFIG_MII -- enable to use MII driver
82 CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
83 CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
84 CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
85 CONFIG_SYS_FAULT_ECHO_LINK_DOWN --
86 CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
87 CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
88 MCFFEC_TOUT_LOOP -- set FEC timeout loop
90 CONFIG_MCFTMR -- define to use DMA timer
91 CONFIG_MCFPIT -- define to use PIT timer
93 CONFIG_SYS_I2C_FSL -- define to use FSL common I2C driver
94 CONFIG_SYS_I2C_SOFT -- define for I2C bit-banged
95 CONFIG_SYS_I2C_SPEED -- define for I2C speed
96 CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
97 CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
98 CONFIG_SYS_IMMR -- define for MBAR offset
100 CONFIG_SYS_MBAR -- define MBAR offset
102 CONFIG_MONITOR_IS_IN_RAM -- Not support
104 CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301x internal SRAM
106 CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
107 CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
108 CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
110 CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
112 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
115 Flash: 0x00000000-0x3FFFFFFF (1024MB)
116 DDR: 0x40000000-0x7FFFFFFF (1024MB)
117 SRAM: 0x80000000-0x8FFFFFFF (256MB)
118 IP: 0xFC000000-0xFFFFFFFF (256MB)
120 2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
122 Flash0: 0x00000000-0x00FFFFFF (16MB)
123 DDR: 0x40000000-0x4FFFFFFF (256MB)
124 SRAM: 0x80000000-0x80007FFF (32KB)
125 IP: 0xFC000000-0xFC0FFFFF (64KB)
129 3.1 To create U-Boot the gcc-4.x-xx compiler set (ColdFire ELF or
134 export CROSS_COMPILE=cross-compile-prefix
135 cd u-boot
145 U-Boot 2008.10 (Oct 22 2007 - 11:07:57)
158 -> print
165 u-boot=u-boot.bin
166 load=tftp ${loadaddr) ${u-boot}
179 ->