97 	printf("CPLD:  V%x.%x\nPCBA:  V%x.0\nVBank: %d\n",  in cpld_show()
104 	printf("soft_mux_on =%x\n",  in cpld_show()
106 	printf("cfg_rcw_src1 =%x\n",  in cpld_show()
108 	printf("cfg_rcw_src2 =%x\n",  in cpld_show()
110 	printf("vbank =%x\n",  in cpld_show()
112 	printf("gpio =%x\n",  in cpld_show()
114 	printf("i2c3_ifc_mux =%x\n",  in cpld_show()
116 	printf("mux_spi2 =%x\n",  in cpld_show()
118 	printf("can3_usb2_mux =%x\n",  in cpld_show()
120 	printf("qe_lcd_mux =%x\n",  in cpld_show()
122 	printf("serdes_mux =%x\n",  in cpld_show()
278 		printf("No TSECs initialized\n");  in board_eth_init()
321 		printf("CPLD serdes MUX: unsupported MUX type 0x%x\n", type);  in convert_serdes_mux()
329 		printf("Reset board to enable configuration\n");  in convert_serdes_mux()
424 	printf("WARNING: pin conflict! MUX setting may failed!\n");  in config_board_mux()
512 		printf("The regulator (MC34VR500) does not exist. The device does not support deep sleep.\n");  in ls1twr_program_regulator()
630 	printf("Now switch to boot from flash bank %d.\n", bank);  in convert_flash_bank()
634 	printf("Reset board to enable configuration.\n");  in convert_flash_bank()
693 	printf("Serdes Lane B: ");  in print_serdes_mux()
695 		printf("SATA,\n");  in print_serdes_mux()
697 		printf("SGMII 1,\n");  in print_serdes_mux()
699 	printf("Serdes Lane C: ");  in print_serdes_mux()
701 		printf("SGMII 1,\n");  in print_serdes_mux()
703 		printf("PCIe,\n");  in print_serdes_mux()
705 	printf("Serdes Lane D: ");  in print_serdes_mux()
707 		printf("PCIe,\n");  in print_serdes_mux()
709 		printf("SGMII 2,\n");  in print_serdes_mux()
711 	printf("SGMII 1 is on lane ");  in print_serdes_mux()
713 		printf("C.\n");  in print_serdes_mux()
715 		printf("B.\n");  in print_serdes_mux()
724 		printf("Set serdes lane B to SATA.\n");  in serdes_mux_cmd()
727 		printf("Set serdes lane B to SGMII 1.\n");  in serdes_mux_cmd()
730 		printf("Set serdes lane C to SGMII 1.\n");  in serdes_mux_cmd()
733 		printf("Set serdes lane D to SGMII 2.\n");  in serdes_mux_cmd()
736 		printf("Set serdes lane C to PCIe X1.\n");  in serdes_mux_cmd()
739 		printf("Set serdes lane C & lane D to PCIe X2.\n");  in serdes_mux_cmd()