Lines Matching +full:two +full:- +full:ethernet
2 --------
3 The LS1021A-IOT is a Freescale reference board that hosts
7 -------------------------
8 - DDR Controller
9 - Supports 1GB un-buffered DDR3L SDRAM discrete
10 devices(32-bit bus) with 4 bit ECC
11 - DDR power supplies 1.35V to all devices with
13 - Soldered DDR chip
14 - Supprot one fixed speed
15 - Ethernet
16 - Two on-board SGMII 10/100/1G ethernet ports
17 - One Gbit Etherent RGMII interface to 4-ports switch
19 - CPLD
20 - 8-bit registers in CPLD for system configuration
21 - connected to IFC_AD[0:7]
22 - Power Supplies
23 - 12V@5A DC
24 - SDHC
25 - SDHC port connects directly to a full 8-bit SD/MMC slot
26 - Support for SDIO devices
27 - USB
28 - Two on-board USB 3.0
29 - One on-board USB k22
30 - PCIe
31 - Two MiniPCIe Solts
32 - SATA
33 - Support SATA Connector
34 - AUDIO
35 - AUDIO in and out
36 - I/O Expansion
37 - Arduino Shield Connector
38 - Port0 - CAN/GPIO/Flextimer
39 - Port1 - GPIO/CPLD Expansion
40 - Port2 - SPI/I2C/UART
43 -----------
54 -----------------
55 LS1021A-IOT support two ways of boot: