Lines Matching +full:spi +full:- +full:nor
3 C29XPCIE board is a series of Freescale PCIe add-in cards to perform
6 The Freescale C29x family is a high performance crypto co-processor.
12 - 512Mbyte unbuffered DDR3 SDRAM discrete devices (32-bit bus)
13 - 64 Mbyte NOR flash single-chip memory
14 - 4 Gbyte NAND flash memory
15 - 1 Mbit AT24C1024 I2C EEPROM
16 - 16 Mbyte SPI memory
19 - 10/100/1000 BaseT Ethernet ports:
20 - eTSEC1, RGMII: one 10/100/1000 port
21 - eTSEC2, RGMII: one 10/100/1000 port
22 - DUART interface:
23 - DUART interface: supports two UARTs up to 115200 bps for
27 - Mini-ITX power supply connector
28 - JTAG/COP for debugging
33 0x0_0000_0000 - 0x0_1fff_ffff 512MB DDR
34 0xc_0000_0000 - 0xc_8fff_ffff 256MB PCIE memory
35 0xf_ec00_0000 - 0xf_efff_ffff 64MB NOR flash
36 0xf_ffb0_0000 - 0xf_ffb7_ffff 512KB SRAM
37 0xf_ffc0_0000 - 0xf_ffc0_ffff 64KB PCIE IO
38 0xf_ffdf_0000 - 0xf_ffdf_0fff 4KB CPLD
39 0xf_ffe0_0000 - 0xf_ffef_ffff 1MB CCSR
44 -Data rate: 115200 bps
45 -Number of data bits: 8
46 -Parity: None
47 -Number of Stop bits: 1
48 -Flow Control: Hardware/None
50 Settings of DIP-switch
52 SW5[1:4]= 1111 and SW5[6]=0 for boot from 16bit NOR flash
53 SW5[1:4]= 0110 and SW5[6]=0 for boot from SPI flash
56 Build and program U-Boot to NOR flash
58 1. Build u-boot.bin image example:
60 export CROSS_COMPILE=/your_path/powerpc-linux-gnu-
63 2. Program u-boot.bin into NOR flash
71 Alternate NOR bank
74 1. Program u-boot.bin into alternate NOR bank
80 2. Switch to alternate NOR bank
82 - [bank] bank value select 1-4
83 - bank 1 on the flash 0x0000000~0x0ffffff
84 - bank 2 on the flash 0x1000000~0x1ffffff
85 - bank 3 on the flash 0x2000000~0x2ffffff
86 - bank 4 on the flash 0x3000000~0x3ffffff
89 Build and program U-Boot to SPI flash
91 1. Build u-boot-spi.bin image
93 Need the boot_format tool to generate u-boot-spi.bin from the u-boot.bin.
95 2. Program u-boot-spi.bin into SPI flash
96 => tftp $loadaddr $uboot-spi