Lines Matching +full:save +full:- +full:mac +full:- +full:address
2 -----
3 The Buffalo Linkstation Pro/Live, codename LS-XHL and LS-CHLv2, is a single
4 disk NAS server. The PCBs of the LS-XHL and LS-CHLv2 are almost the same.
5 The LS-XHL has a faster CPU and more RAM with a wider data bus, therefore
6 the LS-XHL PCB has two SDRAM chips. Both have a Kirkwood CPU (Marvell
7 88F6281). The only on-board storage is a 4 Mbit SPI flash which stores the
13 -----------
19 Therefore, on entering the resuce mode, a random ethernet address is
20 generated if no valid address could be loaded from the environment variable
25 address assigned to the board, you either have to sniff the traffic or
29 second, while powering-on the device. The status LED turns solid amber if
32 Pressing the same button for at least 10 seconds on power-up will erase the
35 - blinking blue, for about one second
36 - solid amber, for about nine seconds
37 - blinking amber, until you release the button
45 'restore_env' to save your changes. It unsets all the network variables
49 The common use case for this is setting a MAC address. Let us assume you
52 use the following commands to set your MAC address:
57 Of course you need to replace the 00:00:00:00:00:00 with your valid MAC
58 address, which can be found on a sticker on the bottom of your box.
62 ----------
77 Power-on Switch
78 ---------------
79 The power-on switch is a software switch. If it is not in ON position when
86 ------------
96 Use this for new-style booting. Loads three files /vmlinuz, /initrd.img
98 have debian and the flash-kernel package installed.
102 storage device and the filename for the device tree is kirkwood-lsxhl.dtb
103 (or kirkwood-lschlv2.dtb).
110 second on power-up. Does a DHCP request and enables the network console.
119 ---------
120 00000 - 5ffff u-boot
121 60000 - 6ffff reserved, may be used to store dtb
122 70000 - 7ffff u-boot environment
126 ---------
128 make u-boot.kwb
132 -----------------
133 Just flash the resulting u-boot.kwb to the beginning of the SPI flash. If
137 bootp ${loadaddr} u-boot.kwb