Lines Matching +full:random +full:- +full:access

2 -----
3 The Buffalo Linkstation Pro/Live, codename LS-XHL and LS-CHLv2, is a single
4 disk NAS server. The PCBs of the LS-XHL and LS-CHLv2 are almost the same.
5 The LS-XHL has a faster CPU and more RAM with a wider data bus, therefore
6 the LS-XHL PCB has two SDRAM chips. Both have a Kirkwood CPU (Marvell
7 88F6281). The only on-board storage is a 4 Mbit SPI flash which stores the
13 -----------
15 access an (unmodified) board other than using the netconsole. If you want
19 Therefore, on entering the resuce mode, a random ethernet address is
24 access board from any host within the network segment. To determine the IP
29 second, while powering-on the device. The status LED turns solid amber if
32 Pressing the same button for at least 10 seconds on power-up will erase the
35 - blinking blue, for about one second
36 - solid amber, for about nine seconds
37 - blinking amber, until you release the button
44 directory to access your board. There is a helper script named
62 ----------
77 Power-on Switch
78 ---------------
79 The power-on switch is a software switch. If it is not in ON position when
86 ------------
96   Use this for new-style booting. Loads three files /vmlinuz, /initrd.img
98   have debian and the flash-kernel package installed.
102   storage device and the filename for the device tree is kirkwood-lsxhl.dtb
103   (or kirkwood-lschlv2.dtb).
110   second on power-up. Does a DHCP request and enables the network console.
119 ---------
120 00000 - 5ffff   u-boot
121 60000 - 6ffff   reserved, may be used to store dtb
122 70000 - 7ffff   u-boot environment
126 ---------
128 make u-boot.kwb
132 -----------------
133 Just flash the resulting u-boot.kwb to the beginning of the SPI flash. If
137  bootp ${loadaddr} u-boot.kwb