Lines Matching +full:board +full:- +full:2
9 AM335X based board:
13 Enabling the D-Cache
19 2 Jumpers:
21 Jumper 1 Jumper 2 Bootmode
40 $ make -s all
42 -> now you have the MLO and the u-boot.img file, you can put
48 There are a lot of board versions and boot configurations, which
51 ARM architecture --->
52 enable different boot versions for the shc board (enable eMMC) --->
58 enable different board versions for the shc board (C3 Sample board version) --->
59 ( ) B Sample board version
60 ( ) B2 Sample board version
61 ( ) C Sample board version
62 ( ) C2 Sample board version
63 (X) C3 Sample board version
64 ( ) Series board version
68 - see also doc/SPL/README.am335x-network
70 - set the jumper into netboot mode
71 - compile the U-boot sources with:
74 - copy the images into your tftp boot directory
75 cp spl/u-boot-spl.bin /tftpboot/.../u-boot-spl-restore.bin
76 cp u-boot.img /tftpboot/.../u-boot-restore.img
77 - power on the board, and you should get something like this:
79 U-Boot SPL 2016.05-rc2-00016-gf23b960-dirty (Apr 26 2016 - 09:02:18)
88 <ethaddr> not set. Validating first E-fuse MAC
93 BOOTP broadcast 2
97 Filename 'shc/u-boot-restore.img'.
105 U-Boot 2016.05-rc2-00016-gf23b960-dirty (Apr 26 2016 - 09:02:18 +0200)
111 *** Warning - bad CRC, using default environment