1 // SPDX-License-Identifier: GPL-2.0+
3  * (C) Copyright 2007-2008
24 #include <asm/mach-types.h>
28 /* ------------------------------------------------------------------------- */
41 	csa = readl(&matrix->ebicsa);  in at91sam9261ek_nand_hw_init()
44 	writel(csa, &matrix->ebicsa);  in at91sam9261ek_nand_hw_init()
50 		&smc->cs[3].setup);  in at91sam9261ek_nand_hw_init()
53 		&smc->cs[3].pulse);  in at91sam9261ek_nand_hw_init()
55 		&smc->cs[3].cycle);  in at91sam9261ek_nand_hw_init()
59 		&smc->cs[3].setup);  in at91sam9261ek_nand_hw_init()
62 		&smc->cs[3].pulse);  in at91sam9261ek_nand_hw_init()
64 		&smc->cs[3].cycle);  in at91sam9261ek_nand_hw_init()
74 		       &smc->cs[3].mode);  in at91sam9261ek_nand_hw_init()
98 		&smc->cs[2].setup);  in at91sam9261ek_dm9000_hw_init()
101 		&smc->cs[2].pulse);  in at91sam9261ek_dm9000_hw_init()
103 		&smc->cs[2].cycle);  in at91sam9261ek_dm9000_hw_init()
108 		       &smc->cs[2].mode);  in at91sam9261ek_dm9000_hw_init()
112 		&smc->cs[2].setup);  in at91sam9261ek_dm9000_hw_init()
115 		&smc->cs[2].pulse);  in at91sam9261ek_dm9000_hw_init()
117 		&smc->cs[2].cycle);  in at91sam9261ek_dm9000_hw_init()
122 		       &smc->cs[2].mode);  in at91sam9261ek_dm9000_hw_init()
128 	/* Configure Interrupt pin as input, no pull-up */  in at91sam9261ek_dm9000_hw_init()
188 	/* For 9G10EK, let U-Boot allocate the framebuffer in SDRAM */  in at91sam9261ek_lcd_hw_init()
190 	gd->fb_base = ATMEL_BASE_SRAM;  in at91sam9261ek_lcd_hw_init()
213 		dram_size += gd->bd->bi_dram[i].size;  in lcd_show_board_info()
216 		nand_size += get_nand_dev_by_index(i)->size;  in lcd_show_board_info()
244 	/* arch number of AT91SAM9G10EK-Board */  in board_init()
245 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK;  in board_init()
247 	/* arch number of AT91SAM9261EK-Board */  in board_init()
248 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;  in board_init()
251 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;  in board_init()
274 	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,  in dram_init()