Lines Matching +full:0 +full:x10002000
21 reg = <0 0 0 0>;
26 * that the STM32L flash erases to 0, not 0xff.
29 image-pos = <0x08000000>;
30 size = <0x20000>;
31 erase-value = <0>;
35 image-pos = <0>;
36 size = <0xf000>;
39 image-pos = <0xf000>;
40 size = <0x1000>;
43 image-pos = <0x10000>;
44 size = <0x10000>;
56 reg = <0x0 0x10002000 0x0 0x1000>;
60 gpio_a: gpios@0 {
82 i2c_0: i2c@0 {
84 #size-cells = <0>;
85 reg = <0 0 0 0>;
89 pinctrl-0 = <&pinctrl_i2c0>;
91 reg = <0x2c>;
97 reg = <0x43>;
102 reg = <0x40>;
106 reg = <0x41>;
110 reg = <0xff>;
134 gpios = <&gpio_a 1 0>;
139 gpios = <&gpio_a 2 0>;
149 ranges = <0x02000000 0 0x10000000 0 0x10000000 0 0x2000
150 0x01000000 0 0x20000000 0 0x20000000 0 0x2000>;
151 pci@1f,0 {
153 reg = <0xf800 0 0 0 0>;
154 emul@1f,0 {
179 spi@0 {
181 #size-cells = <0>;
182 reg = <0 0 0 0>;
184 cs-gpios = <0>, <&gpio_a 0>;
185 firmware_storage_spi: flash@0 {
186 reg = <0>;
201 longbytearray = [09 0a 0b 0c 0d 0e 0f 10 11];
213 longbytearray = [09 0a 0b 0c];
253 light-gpios = <&gpio_a 2>, <&gpio_b 6 0>;
261 pinctrl-0 = <&pinctrl_serial0>;
264 usb@0 {
270 #size-cells = <0>;
272 reg = <0>;
286 #size-cells = <0>;
288 reg = <0>;
301 spmi: spmi@0 {
303 #address-cells = <0x1>;
304 #size-cells = <0x1>;
305 pm8916@0 {
307 reg = <0x0 0x1>;
308 #address-cells = <0x1>;
309 #size-cells = <0x1>;
313 reg = <0xc000 0x400>;