sandbox/dts/sandbox.dts

27 		reg = <0 0>;
33 		 * that the STM32L flash erases to 0, not 0xff.
37 			image-pos = <0x08000000>;
38 			size = <0x20000>;
39 			erase-value = <0>;
43 				image-pos = <0>;
44 				size = <0xf000>;
47 				image-pos = <0xf000>;
48 				size = <0x1000>;
51 				image-pos = <0x10000>;
52 				size = <0x10000>;
59 		skip-localhost = <0>;
64 		reg = <0x10002000 0x1000>;
68 	gpio_a: gpios@0 {
92 	i2c_0: i2c@0 {
94 		#size-cells = <0>;
95 		reg = <0 0>;
99 		pinctrl-0 = <&pinctrl_i2c0>;
101 			reg = <0x2c>;
107 			reg = <0x43>;
112 			reg = <0x40>;
116 			reg = <0x41>;
120 			reg = <0xff>;
149 			gpios = <&gpio_a 1 0>;
154 			gpios = <&gpio_a 2 0>;
164 		ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000
165 				0x01000000 0 0x20000000 0x20000000 0 0x2000>;
166 		pci@1f,0 {
168 			reg = <0xf800 0 0 0 0>;
169 			emul@1f,0 {
204 			sound-dai = <&i2s 0>;
208 			sound-dai = <&audio 0>;
212 	spi@0 {
215 		#size-cells = <0>;
216 		reg = <0 0>;
218 		cs-gpios = <0>, <&gpio_a 0>;
219 		firmware_storage_spi: flash@0 {
221 			reg = <0>;
236 		longbytearray = [09 0a 0b 0c 0d 0e 0f 10 11];
248 		longbytearray = [09 0a 0b 0c];
289 		light-gpios = <&gpio_a 2>, <&gpio_b 6 0>;
298 		pinctrl-0 = <&pinctrl_serial0>;
301 	usb@0 {
307 			#size-cells = <0>;
309 				reg = <0>;
323 				#size-cells = <0>;
325 					reg = <0>;
338 	spmi: spmi@0 {
340 		#address-cells = <0x1>;
341 		#size-cells = <0x1>;
342 		pm8916@0 {
344 			reg = <0x0 0x1>;
345 			#address-cells = <0x1>;
346 			#size-cells = <0x1>;
350 				reg = <0xc000 0x400>;
359 	axi: axi@0 {
361 		#address-cells = <0x1>;
362 		#size-cells = <0x1>;
363 		store@0 {
365 			reg = <0x0 0x400>;
373 		pinctrl-0 = <&pinctrl_onewire0>;
376 		sandbox_eeprom0: sandbox_eeprom@0 {