mips/dts/mscc%2Cluton.dtsi

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include <dt-bindings/gpio/gpio.h>
9 	#address-cells = <1>;
10 	#size-cells = <1>;
14 		#address-cells = <1>;
15 		#size-cells = <0>;
28 	sys_clk: sys-clk {
29 		compatible = "fixed-clock";
30 		#clock-cells = <0>;
31 		clock-frequency = <250000000>;
33 	ahb_clk: ahb-clk {
34 		compatible = "fixed-clock";
35 		#clock-cells = <0>;
36 		clock-frequency = <208333333>;
40 		compatible = "simple-bus";
41 		#address-cells = <1>;
42 		#size-cells = <1>;
46 			pinctrl-0 = <&uart_pins>;
47 			pinctrl-names = "default";
52 			reg-io-width = <4>;
53 			reg-shift = <2>;
59 			compatible = "mscc,luton-pinctrl";
61 			gpio-controller;
62 			#gpio-cells = <2>;
63 			gpio-ranges = <&gpio 0 0 32>;
65 			sgpio_pins: sgpio-pins {
69 			uart_pins: uart-pins {
76 			compatible = "mscc,luton-sgpio";
79 			pinctrl-0 = <&sgpio_pins>;
80 			pinctrl-names = "default";
82 			gpio-controller;
83 			#gpio-cells = <2>;
84 			gpio-ranges = <&sgpio 0 0 64>;
87 		spi0: spi-bitbang {
88 			compatible = "mscc,luton-bb-spi";
91 			num-chipselects = <1>;
92 			#address-cells = <1>;
93 			#size-cells = <0>;
97 			compatible = "mscc,vsc7527-switch";
128 			reg-names = "port0", "port1", "port2", "port3",
137 			ethernet-ports {
138 				#address-cells = <1>;
139 				#size-cells = <0>;
141 				port0: port@0 {
144 				port1: port@1 {
147 				port2: port@2 {
150 				port3: port@3 {
153 				port4: port@4 {
156 				port5: port@5 {
159 				port6: port@6 {
162 				port7: port@7 {
165 				port8: port@8 {
168 				port9: port@9 {
171 				port10: port@10 {
174 				port11: port@11 {
177 				port12: port@12 {
180 				port13: port@13 {
183 				port14: port@14 {
186 				port15: port@15 {
189 				port16: port@16 {
192 				port17: port@17 {
195 				port18: port@18 {
198 				port19: port@19 {
201 				port20: port@20 {
204 				port21: port@21 {
207 				port22: port@22 {
210 				port23: port@23 {
217 			#address-cells = <1>;
218 			#size-cells = <0>;
219 			compatible = "mscc,luton-miim";
223 			phy0: ethernet-phy@0 {
226 			phy1: ethernet-phy@1 {
229 			phy2: ethernet-phy@2 {
232 			phy3: ethernet-phy@3 {
235 			phy4: ethernet-phy@4 {
238 			phy5: ethernet-phy@5 {
241 			phy6: ethernet-phy@6 {
244 			phy7: ethernet-phy@7 {
247 			phy8: ethernet-phy@8 {
250 			phy9: ethernet-phy@9 {
253 			phy10: ethernet-phy@10 {
256 			phy11: ethernet-phy@11 {