Lines Matching +full:zynq +full:- +full:gpio +full:- +full:1
1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (C) 2011 - 2015 Xilinx
6 /dts-v1/;
7 #include "zynq-7000.dtsi"
11 compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
28 stdout-path = "serial0:115200n8";
32 compatible = "usb-nop-xceiv";
33 #phy-cells = <0>;
38 ps-clk-frequency = <33333333>;
43 phy-mode = "rgmii-id";
44 phy-handle = <ðernet_phy>;
45 pinctrl-names = "default";
46 pinctrl-0 = <&pinctrl_gem0_default>;
48 ethernet_phy: ethernet-phy@7 {
50 device_type = "ethernet-phy";
55 pinctrl-names = "default";
56 pinctrl-0 = <&pinctrl_gpio0_default>;
61 clock-frequency = <400000>;
62 pinctrl-names = "default";
63 pinctrl-0 = <&pinctrl_i2c0_default>;
65 i2c-mux@74 {
67 #address-cells = <1>;
68 #size-cells = <0>;
72 #address-cells = <1>;
73 #size-cells = <0>;
75 si570: clock-generator@5d {
76 #clock-cells = <0>;
78 temperature-stability = <50>;
80 factory-fout = <156250000>;
81 clock-frequency = <148500000>;
85 i2c@1 {
86 #address-cells = <1>;
87 #size-cells = <0>;
88 reg = <1>;
89 adv7511: hdmi-tx@39 {
92 adi,input-depth = <8>;
93 adi,input-colorspace = "yuv422";
94 adi,input-clock = "1x";
95 adi,input-style = <3>;
96 adi,input-justification = "evenly";
101 #address-cells = <1>;
102 #size-cells = <0>;
111 #address-cells = <1>;
112 #size-cells = <0>;
114 gpio@21 {
117 gpio-controller;
118 #gpio-cells = <2>;
123 #address-cells = <1>;
124 #size-cells = <0>;
133 #address-cells = <1>;
134 #size-cells = <0>;
145 pinctrl_gem0_default: gem0-default {
153 slew-rate = <0>;
154 io-standard = <4>;
157 conf-rx {
159 bias-high-impedance;
160 low-power-disable;
163 conf-tx {
165 low-power-enable;
166 bias-disable;
169 mux-mdio {
174 conf-mdio {
176 slew-rate = <0>;
177 io-standard = <1>;
178 bias-disable;
182 pinctrl_gpio0_default: gpio0-default {
190 slew-rate = <0>;
191 io-standard = <1>;
194 conf-pull-up {
196 bias-pull-up;
199 conf-pull-none {
201 bias-disable;
205 pinctrl_i2c0_default: i2c0-default {
213 bias-pull-up;
214 slew-rate = <0>;
215 io-standard = <1>;
219 pinctrl_sdhci0_default: sdhci0-default {
227 slew-rate = <0>;
228 io-standard = <1>;
229 bias-disable;
232 mux-cd {
237 conf-cd {
239 bias-high-impedance;
240 bias-pull-up;
241 slew-rate = <0>;
242 io-standard = <1>;
245 mux-wp {
250 conf-wp {
252 bias-high-impedance;
253 bias-pull-up;
254 slew-rate = <0>;
255 io-standard = <1>;
259 pinctrl_uart1_default: uart1-default {
267 slew-rate = <0>;
268 io-standard = <1>;
271 conf-rx {
273 bias-high-impedance;
276 conf-tx {
278 bias-disable;
282 pinctrl_usb0_default: usb0-default {
290 slew-rate = <0>;
291 io-standard = <1>;
294 conf-rx {
296 bias-high-impedance;
299 conf-tx {
302 bias-disable;
308 u-boot,dm-pre-reloc;
313 u-boot,dm-pre-reloc;
315 pinctrl-names = "default";
316 pinctrl-0 = <&pinctrl_sdhci0_default>;
320 u-boot,dm-pre-reloc;
322 pinctrl-names = "default";
323 pinctrl-0 = <&pinctrl_uart1_default>;
329 usb-phy = <&usb_phy0>;
330 pinctrl-names = "default";
331 pinctrl-0 = <&pinctrl_usb0_default>;
335 reset-on-timeout;