arm/dts/tegra124-jetson-tk1.dts

1 /dts-v1/;
7 	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
10 		stdout-path = &uartd;
32 	pcie-controller@01003000 {
35 		avddio-pex-supply = <&vdd_1v05_run>;
36 		dvddio-pex-supply = <&vdd_1v05_run>;
37 		avdd-pex-pll-supply = <&vdd_1v05_run>;
38 		hvdd-pex-supply = <&vdd_3v3_lp0>;
39 		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
40 		vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
41 		avdd-pll-erefe-supply = <&avdd_1v05_run>;
54 		clock-frequency = <100000>;
59 		clock-frequency = <100000>;
64 		clock-frequency = <100000>;
69 		clock-frequency = <100000>;
72 	/* Expansion PWR_I2C_*, on-board components */
75 		clock-frequency = <400000>;
82 			ams,system-power-controller;
84 			#interrupt-cells = <2>;
85 			interrupt-controller;
87 			gpio-controller;
88 			#gpio-cells = <2>;
90 			pinctrl-names = "default";
91 			pinctrl-0 = <&as3722_default>;
97 					bias-pull-down;
103 					bias-pull-up;
108 					bias-high-impedance;
113 				vsup-sd2-supply = <&vdd_5v0_sys>;
114 				vsup-sd3-supply = <&vdd_5v0_sys>;
115 				vsup-sd4-supply = <&vdd_5v0_sys>;
116 				vsup-sd5-supply = <&vdd_5v0_sys>;
117 				vin-ldo0-supply = <&vdd_1v35_lp0>;
118 				vin-ldo1-6-supply = <&vdd_3v3_run>;
119 				vin-ldo2-5-7-supply = <&vddio_1v8>;
120 				vin-ldo3-4-supply = <&vdd_3v3_sys>;
121 				vin-ldo9-10-supply = <&vdd_5v0_sys>;
122 				vin-ldo11-supply = <&vdd_3v3_run>;
125 					regulator-name = "+VDD_CPU_AP";
126 					regulator-min-microvolt = <700000>;
127 					regulator-max-microvolt = <1400000>;
128 					regulator-min-microamp = <3500000>;
129 					regulator-max-microamp = <3500000>;
130 					regulator-always-on;
131 					regulator-boot-on;
132 					ams,ext-control = <2>;
136 					regulator-name = "+VDD_CORE";
137 					regulator-min-microvolt = <700000>;
138 					regulator-max-microvolt = <1350000>;
139 					regulator-min-microamp = <2500000>;
140 					regulator-max-microamp = <2500000>;
141 					regulator-always-on;
142 					regulator-boot-on;
143 					ams,ext-control = <1>;
147 					regulator-name = "+1.35V_LP0(sd2)";
148 					regulator-min-microvolt = <1350000>;
149 					regulator-max-microvolt = <1350000>;
150 					regulator-always-on;
151 					regulator-boot-on;
155 					regulator-name = "+1.35V_LP0(sd3)";
156 					regulator-min-microvolt = <1350000>;
157 					regulator-max-microvolt = <1350000>;
158 					regulator-always-on;
159 					regulator-boot-on;
163 					regulator-name = "+1.05V_RUN";
164 					regulator-min-microvolt = <1050000>;
165 					regulator-max-microvolt = <1050000>;
169 					regulator-name = "+1.8V_VDDIO";
170 					regulator-min-microvolt = <1800000>;
171 					regulator-max-microvolt = <1800000>;
172 					regulator-boot-on;
173 					regulator-always-on;
177 					regulator-name = "+VDD_GPU_AP";
178 					regulator-min-microvolt = <650000>;
179 					regulator-max-microvolt = <1200000>;
180 					regulator-min-microamp = <3500000>;
181 					regulator-max-microamp = <3500000>;
182 					regulator-boot-on;
183 					regulator-always-on;
187 					regulator-name = "+1.05V_RUN_AVDD";
188 					regulator-min-microvolt = <1050000>;
189 					regulator-max-microvolt = <1050000>;
190 					regulator-boot-on;
191 					regulator-always-on;
192 					ams,ext-control = <1>;
196 					regulator-name = "+1.8V_RUN_CAM";
197 					regulator-min-microvolt = <1800000>;
198 					regulator-max-microvolt = <1800000>;
202 					regulator-name = "+1.2V_GEN_AVDD";
203 					regulator-min-microvolt = <1200000>;
204 					regulator-max-microvolt = <1200000>;
205 					regulator-boot-on;
206 					regulator-always-on;
210 					regulator-name = "+1.05V_LP0_VDD_RTC";
211 					regulator-min-microvolt = <1000000>;
212 					regulator-max-microvolt = <1000000>;
213 					regulator-boot-on;
214 					regulator-always-on;
215 					ams,enable-tracking;
219 					regulator-name = "+2.8V_RUN_CAM";
220 					regulator-min-microvolt = <2800000>;
221 					regulator-max-microvolt = <2800000>;
225 					regulator-name = "+1.2V_RUN_CAM_FRONT";
226 					regulator-min-microvolt = <1200000>;
227 					regulator-max-microvolt = <1200000>;
231 					regulator-name = "+VDDIO_SDMMC3";
232 					regulator-min-microvolt = <1800000>;
233 					regulator-max-microvolt = <3300000>;
237 					regulator-name = "+1.05V_RUN_CAM_REAR";
238 					regulator-min-microvolt = <1050000>;
239 					regulator-max-microvolt = <1050000>;
243 					regulator-name = "+3.3V_RUN_TOUCH";
244 					regulator-min-microvolt = <2800000>;
245 					regulator-max-microvolt = <2800000>;
249 					regulator-name = "+2.8V_RUN_CAM_AF";
250 					regulator-min-microvolt = <2800000>;
251 					regulator-max-microvolt = <2800000>;
255 					regulator-name = "+1.8V_RUN_VPP_FUSE";
256 					regulator-min-microvolt = <1800000>;
257 					regulator-max-microvolt = <1800000>;
265 		clock-frequency = <400000>;
270 		spi-max-frequency = <25000000>;
275 		spi-max-frequency = <25000000>;
279 		pinctrl-0 = <&padctl_default>;
280 		pinctrl-names = "default";
284 				nvidia,lanes = "pcie-0", "pcie-1";
290 				nvidia,lanes = "pcie-2", "pcie-3",
291 					       "pcie-4";
297 				nvidia,lanes = "sata-0";
306 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
307 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
308 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
309 		bus-width = <4>;
314 		bus-width = <8>;
315 		non-removable;
321 		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
326 		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
330 		compatible = "simple-bus";
331 		#address-cells = <1>;
332 		#size-cells = <0>;
335 			compatible = "fixed-clock";
337 			#clock-cells = <0>;
338 			clock-frequency = <32768>;
343 		compatible = "simple-bus";
344 		#address-cells = <1>;
345 		#size-cells = <0>;
347 		vdd_mux: regulator@0 {
348 			compatible = "regulator-fixed";
350 			regulator-name = "+VDD_MUX";
351 			regulator-min-microvolt = <12000000>;
352 			regulator-max-microvolt = <12000000>;
353 			regulator-always-on;
354 			regulator-boot-on;
357 		vdd_5v0_sys: regulator@1 {
358 			compatible = "regulator-fixed";
360 			regulator-name = "+5V_SYS";
361 			regulator-min-microvolt = <5000000>;
362 			regulator-max-microvolt = <5000000>;
363 			regulator-always-on;
364 			regulator-boot-on;
365 			vin-supply = <&vdd_mux>;
368 		vdd_3v3_sys: regulator@2 {
369 			compatible = "regulator-fixed";
371 			regulator-name = "+3.3V_SYS";
372 			regulator-min-microvolt = <3300000>;
373 			regulator-max-microvolt = <3300000>;
374 			regulator-always-on;
375 			regulator-boot-on;
376 			vin-supply = <&vdd_mux>;
379 		vdd_3v3_run: regulator@3 {
380 			compatible = "regulator-fixed";
382 			regulator-name = "+3.3V_RUN";
383 			regulator-min-microvolt = <3300000>;
384 			regulator-max-microvolt = <3300000>;
385 			regulator-always-on;
386 			regulator-boot-on;
388 			enable-active-high;
389 			vin-supply = <&vdd_3v3_sys>;
392 		vdd_3v3_hdmi: regulator@4 {
393 			compatible = "regulator-fixed";
395 			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
396 			regulator-min-microvolt = <3300000>;
397 			regulator-max-microvolt = <3300000>;
398 			vin-supply = <&vdd_3v3_run>;
401 		vdd_usb1_vbus: regulator@7 {
402 			compatible = "regulator-fixed";
404 			regulator-name = "+USB0_VBUS_SW";
405 			regulator-min-microvolt = <5000000>;
406 			regulator-max-microvolt = <5000000>;
408 			enable-active-high;
409 			gpio-open-drain;
410 			vin-supply = <&vdd_5v0_sys>;
413 		vdd_usb3_vbus: regulator@8 {
414 			compatible = "regulator-fixed";
416 			regulator-name = "+5V_USB_HS";
417 			regulator-min-microvolt = <5000000>;
418 			regulator-max-microvolt = <5000000>;
420 			enable-active-high;
421 			gpio-open-drain;
422 			vin-supply = <&vdd_5v0_sys>;
425 		vdd_3v3_lp0: regulator@10 {
426 			compatible = "regulator-fixed";
428 			regulator-name = "+3.3V_LP0";
429 			regulator-min-microvolt = <3300000>;
430 			regulator-max-microvolt = <3300000>;
431 			regulator-always-on;
432 			regulator-boot-on;
434 			enable-active-high;
435 			vin-supply = <&vdd_3v3_sys>;
438 		vdd_hdmi_pll: regulator@11 {
439 			compatible = "regulator-fixed";
441 			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
442 			regulator-min-microvolt = <1050000>;
443 			regulator-max-microvolt = <1050000>;
445 			vin-supply = <&vdd_1v05_run>;
448 		vdd_5v0_hdmi: regulator@12 {
449 			compatible = "regulator-fixed";
451 			regulator-name = "+5V_HDMI_CON";
452 			regulator-min-microvolt = <5000000>;
453 			regulator-max-microvolt = <5000000>;
455 			enable-active-high;
456 			vin-supply = <&vdd_5v0_sys>;
460 		vdd_5v0_sata: regulator@13 {
461 			compatible = "regulator-fixed";
463 			regulator-name = "+5V_SATA";
464 			regulator-min-microvolt = <5000000>;
465 			regulator-max-microvolt = <5000000>;
467 			enable-active-high;
468 			vin-supply = <&vdd_5v0_sys>;
471 		vdd_12v0_sata: regulator@14 {
472 			compatible = "regulator-fixed";
474 			regulator-name = "+12V_SATA";
475 			regulator-min-microvolt = <12000000>;
476 			regulator-max-microvolt = <12000000>;
478 			enable-active-high;
479 			vin-supply = <&vdd_mux>;