Lines Matching +full:vcc33 +full:- +full:supply
2 * Copyright 2014 Chen-Yu Tsai
4 * Chen-Yu Tsai <wens@csie.org>
6 * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun9i-a80.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
52 compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
60 stdout-path = "serial0:115200n8";
64 compatible = "gpio-leds";
83 reg_usb1_vbus: usb1-vbus {
84 compatible = "regulator-fixed";
85 pinctrl-names = "default";
86 regulator-min-microvolt = <5000000>;
87 regulator-max-microvolt = <5000000>;
88 enable-active-high;
92 reg_usb3_vbus: usb3-vbus {
93 compatible = "regulator-fixed";
94 pinctrl-names = "default";
95 regulator-min-microvolt = <5000000>;
96 regulator-max-microvolt = <5000000>;
97 enable-active-high;
101 wifi_pwrseq: wifi-pwrseq {
102 compatible = "mmc-pwrseq-simple";
104 clock-names = "ext_clock";
105 /* enables internal regulator and de-asserts reset */
106 reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
124 pinctrl-names = "default";
125 pinctrl-0 = <&mmc0_pins>;
126 vmmc-supply = <®_dcdc1>;
127 bus-width = <4>;
128 cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH8 */
133 pinctrl-names = "default";
134 pinctrl-0 = <&mmc1_pins>;
135 vmmc-supply = <®_dldo1>;
136 vqmmc-supply = <®_cldo3>;
137 mmc-pwrseq = <&wifi_pwrseq>;
138 bus-width = <4>;
139 non-removable;
144 bias-pull-up;
148 pinctrl-names = "default";
149 pinctrl-0 = <&mmc2_8bit_pins>;
150 vmmc-supply = <®_dcdc1>;
151 bus-width = <8>;
152 non-removable;
153 cap-mmc-hw-reset;
159 drive-strength = <40>;
184 interrupt-parent = <&nmi_intc>;
193 regulator-always-on;
194 regulator-min-microvolt = <3000000>;
195 regulator-max-microvolt = <3000000>;
196 regulator-name = "vcc33-usbh";
200 regulator-min-microvolt = <1800000>;
201 regulator-max-microvolt = <1800000>;
202 regulator-name = "vcc-pb-io-cam";
210 regulator-always-on;
211 regulator-min-microvolt = <800000>;
212 regulator-max-microvolt = <1100000>;
213 regulator-name = "vdd-cpus-09-usbh";
217 regulator-always-on;
218 regulator-min-microvolt = <3000000>;
219 regulator-max-microvolt = <3000000>;
220 regulator-name = "vcc-3v";
224 regulator-min-microvolt = <800000>;
225 regulator-max-microvolt = <1100000>;
226 regulator-name = "vdd-gpu";
230 regulator-always-on;
231 regulator-min-microvolt = <800000>;
232 regulator-max-microvolt = <1100000>;
233 regulator-name = "vdd-cpua";
237 regulator-always-on;
238 regulator-min-microvolt = <800000>;
239 regulator-max-microvolt = <1100000>;
240 regulator-name = "vdd-sys-usb0-hdmi";
244 regulator-always-on;
245 regulator-min-microvolt = <1425000>;
246 regulator-max-microvolt = <1575000>;
247 regulator-name = "vcc-dram";
257 regulator-min-microvolt = <3300000>;
258 regulator-max-microvolt = <3300000>;
259 regulator-name = "vcc-wifi";
263 regulator-always-on;
264 regulator-min-microvolt = <3000000>;
265 regulator-max-microvolt = <3000000>;
266 regulator-name = "vcc-pl";
270 regulator-min-microvolt = <1200000>;
271 regulator-max-microvolt = <1200000>;
272 regulator-name = "vcc-dvdd-cam";
276 regulator-min-microvolt = <1800000>;
277 regulator-max-microvolt = <1800000>;
278 regulator-name = "vcc-pe";
282 regulator-always-on;
283 regulator-min-microvolt = <3000000>;
284 regulator-max-microvolt = <3000000>;
285 regulator-name = "vcc-pm-codec-io1";
289 regulator-always-on;
290 regulator-min-microvolt = <3000000>;
291 regulator-max-microvolt = <3000000>;
292 regulator-name = "vcc-pg";
296 regulator-min-microvolt = <2500000>;
297 regulator-max-microvolt = <2500000>;
298 regulator-name = "vcc-pa-gmac-2v5";
302 regulator-name = "vcc-rtc-vdd1v8-io";
312 compatible = "x-powers,axp806";
314 interrupt-parent = <&nmi_intc>;
316 interrupt-controller;
317 #interrupt-cells = <1>;
318 bldoin-supply = <®_dcdce>;
322 regulator-always-on;
323 regulator-min-microvolt = <3000000>;
324 regulator-max-microvolt = <3000000>;
325 regulator-name = "avcc";
333 regulator-name = "s_aldo2";
341 regulator-name = "s_aldo3";
345 regulator-always-on;
346 regulator-min-microvolt = <1700000>;
347 regulator-max-microvolt = <1900000>;
348 regulator-name = "vcc18-efuse-adc-display-csi";
352 regulator-always-on;
353 regulator-min-microvolt = <1700000>;
354 regulator-max-microvolt = <1900000>;
355 regulator-name =
356 "vdd18-drampll-vcc18-pll-cpvdd";
364 regulator-min-microvolt = <1100000>;
365 regulator-max-microvolt = <1300000>;
366 regulator-name = "vcc12-hsic";
372 * 3.3V is the recommended supply voltage
375 regulator-min-microvolt = <3300000>;
376 regulator-max-microvolt = <3300000>;
377 regulator-name = "vcc-gmac-phy";
381 regulator-min-microvolt = <2800000>;
382 regulator-max-microvolt = <2800000>;
383 regulator-name = "afvcc-cam";
387 regulator-min-microvolt = <3000000>;
388 regulator-max-microvolt = <3000000>;
389 regulator-name = "vcc-io-wifi-codec-io2";
393 regulator-always-on;
394 regulator-min-microvolt = <800000>;
395 regulator-max-microvolt = <1100000>;
396 regulator-name = "vdd-cpub";
400 regulator-always-on;
401 regulator-min-microvolt = <800000>;
402 regulator-max-microvolt = <1100000>;
403 regulator-name = "vdd-vpu";
407 regulator-always-on;
408 regulator-min-microvolt = <2100000>;
409 regulator-max-microvolt = <2100000>;
410 regulator-name = "vcc-bldo-codec-ldoin";
418 regulator-name = "s_sw";
424 compatible = "x-powers,ac100";
428 compatible = "x-powers,ac100-codec";
429 interrupt-parent = <&r_pio>;
431 #clock-cells = <0>;
432 clock-output-names = "4M_adda";
436 compatible = "x-powers,ac100-rtc";
437 interrupt-parent = <&nmi_intc>;
440 #clock-cells = <1>;
441 clock-output-names = "cko1_rtc",
451 pinctrl-names = "default";
452 pinctrl-0 = <&uart0_ph_pins>;
457 phy-supply = <®_usb1_vbus>;
462 phy-supply = <®_bldo4>;
468 phy-supply = <®_usb3_vbus>;