arm/dts/sun7i-a20-itead-ibox.dts

2  * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
4  * This file is dual-licensed: you can use it either under the terms
43 /dts-v1/;
44 #include "sun7i-a20.dtsi"
45 #include "sunxi-itead-core-common.dtsi"
48 	model = "Itead Ibox A20";
49 	compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
52 		compatible = "gpio-leds";
53 		pinctrl-names = "default";
54 		pinctrl-0 = <&led_pins_itead_core>;
59 			default-state = "on";
65 			default-state = "on";
70 		compatible = "simple-audio-card";
71 		simple-audio-card,name = "On-board SPDIF";
73 		simple-audio-card,cpu {
74 			sound-dai = <&spdif>;
77 		simple-audio-card,codec {
78 			sound-dai = <&spdif_out>;
82 	spdif_out: spdif-out {
83 		#sound-dai-cells = <0>;
84 		compatible = "linux,spdif-dit";
89 	target-supply = <&reg_ahci_5v>;
97 &gmac {
98 	pinctrl-names = "default";
99 	pinctrl-0 = <&gmac_pins_mii_a>;
101 	phy-mode = "mii";
104 	phy1: ethernet-phy@1 {
111 		interrupt-parent = <&nmi_intc>;
117 	pinctrl-names = "default";
118 	pinctrl-0 = <&ir0_rx_pins_a>;
123 	pinctrl-names = "default";
124 	pinctrl-0 = <&mmc0_pins_a>;
125 	vmmc-supply = <&reg_vcc3v3>;
126 	bus-width = <4>;
127 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
135 		drive-strength = <20>;
144 	pinctrl-names = "default";
145 	pinctrl-0 = <&spdif_tx_pins_a>;