Lines Matching +full:sun7i +full:- +full:a20 +full:- +full:gmac
4 * This file is dual-licensed: you can use it either under the terms
43 /dts-v1/;
44 #include "sun7i-a20.dtsi"
45 #include "sunxi-common-regulators.dtsi"
47 #include <dt-bindings/gpio/gpio.h>
48 #include <dt-bindings/interrupt-controller/irq.h>
51 model = "ICnova-A20 SWAC";
52 compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
59 stdout-path = "serial0:115200n8";
64 cpu-supply = <®_dcdc2>;
75 &gmac {
76 pinctrl-names = "default";
77 pinctrl-0 = <&gmac_pins_mii_a>;
79 phy-mode = "mii";
82 phy1: ethernet-phy@1 {
88 pinctrl-names = "default";
89 pinctrl-0 = <&i2c0_pins_a>;
94 interrupt-parent = <&nmi_intc>;
100 pinctrl-names = "default";
101 pinctrl-0 = <&i2c1_pins_a>;
106 pinctrl-names = "default";
107 pinctrl-0 = <&mmc0_pins_a>;
108 vmmc-supply = <®_vcc3v3>;
109 bus-width = <4>;
110 cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */
125 regulator-always-on;
126 regulator-min-microvolt = <1000000>;
127 regulator-max-microvolt = <1400000>;
128 regulator-name = "vdd-cpu";
132 regulator-always-on;
133 regulator-min-microvolt = <1000000>;
134 regulator-max-microvolt = <1400000>;
135 regulator-name = "vdd-int-dll";
139 regulator-name = "vdd-rtc";
143 regulator-always-on;
144 regulator-min-microvolt = <3000000>;
145 regulator-max-microvolt = <3000000>;
146 regulator-name = "avcc";
158 pinctrl-names = "default";
159 pinctrl-0 = <&uart0_pins_a>;
164 usb1_vbus-supply = <®_usb1_vbus>;
165 usb2_vbus-supply = <®_usb2_vbus>;