arm/dts/sun6i-a31-colombus.dts

4  * Maxime Ripard <maxime.ripard@free-electrons.com>
6  * This file is dual-licensed: you can use it either under the terms
26  *     restriction, including without limitation the rights to use,
41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 /dts-v1/;
46 #include "sun6i-a31.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
53 	compatible = "wits,colombus", "allwinner,sun6i-a31";
60 		stdout-path = "serial0:115200n8";
65 		compatible = "i2c-gpio";
66 		pinctrl-names = "default";
67 		pinctrl-0 = <&i2c_lcd_pins>;
70 		i2c-gpio,delay-us = <5>;
79 	pinctrl-names = "default";
80 	pinctrl-0 = <&gmac_pins_rgmii_a>;
82 	phy-mode = "rgmii";
85 	phy1: ethernet-phy@1 {
91 	pinctrl-names = "default";
92 	pinctrl-0 = <&i2c0_pins_a>;
97 	pinctrl-names = "default";
98 	pinctrl-0 = <&i2c1_pins_a>;
103 	pinctrl-names = "default";
104 	pinctrl-0 = <&i2c2_pins_a>;
110 		interrupt-parent = <&pio>;
116 	pinctrl-names = "default";
117 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
118 	vmmc-supply = <&reg_vcc3v0>;
119 	bus-width = <4>;
120 	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
125 	bias-pull-up;
132 		bias-pull-up;
143 		bias-pull-up;
148 	pinctrl-names = "default";
149 	pinctrl-0 = <&usb2_vbus_pin_colombus>;
155 	pinctrl-names = "default";
156 	pinctrl-0 = <&uart0_pins_a>;
161 	usb2_vbus-supply = <&reg_usb2_vbus>;