Lines Matching +full:hvcc +full:- +full:supply
4 * Based on sun50i-a64-pine64.dts, which is:
7 * This file is dual-licensed: you can use it either under the terms
46 /dts-v1/;
48 #include "sun50i-a64-sopine.dtsi"
52 compatible = "pine64,sopine-baseboard", "pine64,sopine",
53 "allwinner,sun50i-a64";
61 stdout-path = "serial0:115200n8";
64 hdmi-connector {
65 compatible = "hdmi-connector";
70 remote-endpoint = <&hdmi_out_con>;
76 compatible = "regulator-fixed";
77 regulator-name = "vcc1v8";
78 regulator-min-microvolt = <1800000>;
79 regulator-max-microvolt = <1800000>;
96 pinctrl-names = "default";
97 pinctrl-0 = <&rgmii_pins>;
98 phy-mode = "rgmii";
99 phy-handle = <&ext_rgmii_phy>;
100 phy-supply = <®_dc1sw>;
105 hvcc-supply = <®_dldo1>;
111 remote-endpoint = <&hdmi_con_in>;
116 ext_rgmii_phy: ethernet-phy@1 {
117 compatible = "ethernet-phy-ieee802.3-c22";
123 pinctrl-names = "default";
124 pinctrl-0 = <&mmc2_pins>;
125 vmmc-supply = <®_dcdc1>;
126 vqmmc-supply = <®_vcc1v8>;
127 bus-width = <8>;
128 non-removable;
129 cap-mmc-hw-reset;
142 regulator-name = "vcc-phy";
146 regulator-min-microvolt = <3300000>;
147 regulator-max-microvolt = <3300000>;
148 regulator-name = "vcc-hdmi";
152 regulator-min-microvolt = <3300000>;
153 regulator-max-microvolt = <3300000>;
154 regulator-name = "vcc-mipi";
158 regulator-min-microvolt = <3300000>;
159 regulator-max-microvolt = <3300000>;
160 regulator-name = "vcc-wifi";
164 vcc-hdmi-supply = <®_dldo1>;
168 pinctrl-names = "default";
169 pinctrl-0 = <&uart0_pb_pins>;