arm/dts/sun50i-a64-pine64.dts

4  * This file is dual-licensed: you can use it either under the terms
43 /dts-v1/;
45 #include "sun50i-a64.dtsi"
47 #include <dt-bindings/gpio/gpio.h>
51 	compatible = "pine64,pine64", "allwinner,sun50i-a64";
63 		stdout-path = "serial0:115200n8";
66 	hdmi-connector {
67 		compatible = "hdmi-connector";
72 				remote-endpoint = <&hdmi_out_con>;
91 	pinctrl-names = "default";
92 	pinctrl-0 = <&rmii_pins>;
93 	phy-mode = "rmii";
94 	phy-handle = <&ext_rmii_phy1>;
95 	phy-supply = <&reg_dc1sw>;
101 	hvcc-supply = <&reg_dldo1>;
107 		remote-endpoint = <&hdmi_con_in>;
112 	pinctrl-names = "default";
113 	pinctrl-0 = <&i2c1_pins>;
118 	bias-pull-up;
122 	ext_rmii_phy1: ethernet-phy@1 {
123 		compatible = "ethernet-phy-ieee802.3-c22";
129 	pinctrl-names = "default";
130 	pinctrl-0 = <&mmc0_pins>;
131 	vmmc-supply = <&reg_dcdc1>;
132 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
133 	disable-wp;
134 	bus-width = <4>;
150 		compatible = "x-powers,axp803";
152 		interrupt-parent = <&r_intc>;
160 	regulator-always-on;
161 	regulator-min-microvolt = <1800000>;
162 	regulator-max-microvolt = <3300000>;
163 	regulator-name = "vcc-pl";
167 	regulator-always-on;
168 	regulator-min-microvolt = <3000000>;
169 	regulator-max-microvolt = <3000000>;
170 	regulator-name = "vcc-pll-avcc";
174 	regulator-name = "vcc-phy";
178 	regulator-always-on;
179 	regulator-min-microvolt = <3300000>;
180 	regulator-max-microvolt = <3300000>;
181 	regulator-name = "vcc-3v3";
185 	regulator-always-on;
186 	regulator-min-microvolt = <1040000>;
187 	regulator-max-microvolt = <1300000>;
188 	regulator-name = "vdd-cpux";
194  * The DRAM chips used by Pine64 boards are DDR3L-compatible, so they can
199 	regulator-always-on;
200 	regulator-min-microvolt = <1360000>;
201 	regulator-max-microvolt = <1360000>;
202 	regulator-name = "vcc-dram";
206 	regulator-always-on;
207 	regulator-min-microvolt = <1100000>;
208 	regulator-max-microvolt = <1100000>;
209 	regulator-name = "vdd-sys";
213 	regulator-min-microvolt = <3300000>;
214 	regulator-max-microvolt = <3300000>;
215 	regulator-name = "vcc-hdmi";
219 	regulator-min-microvolt = <3300000>;
220 	regulator-max-microvolt = <3300000>;
221 	regulator-name = "vcc-mipi";
225 	regulator-min-microvolt = <3300000>;
226 	regulator-max-microvolt = <3300000>;
227 	regulator-name = "vcc-wifi";
231 	regulator-min-microvolt = <1800000>;
232 	regulator-max-microvolt = <1800000>;
233 	regulator-name = "cpvdd";
237 	regulator-min-microvolt = <1200000>;
238 	regulator-max-microvolt = <1200000>;
239 	regulator-name = "vcc-1v2-hsic";
248 	regulator-always-on;
249 	regulator-min-microvolt = <1100000>;
250 	regulator-max-microvolt = <1100000>;
251 	regulator-name = "vdd-cpus";
255 	regulator-name = "vcc-rtc";
259 	vcc-hdmi-supply = <&reg_dldo1>;
269 	pinctrl-names = "default";
270 	pinctrl-0 = <&uart0_pb_pins>;
276 	pinctrl-names = "default";
277 	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
281 /* On Pi-2 connector */
283 	pinctrl-names = "default";
284 	pinctrl-0 = <&uart2_pins>;
290 	pinctrl-names = "default";
291 	pinctrl-0 = <&uart3_pins>;
297 	pinctrl-names = "default";
298 	pinctrl-0 = <&uart4_pins>;