arm/dts/sun50i-a64-orangepi-win.dts

3  * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
5  * This file is dual-licensed: you can use it either under the terms
44 /dts-v1/;
46 #include "sun50i-a64.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
52 	compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
64 		stdout-path = "serial0:115200n8";
67 	hdmi-connector {
68 		compatible = "hdmi-connector";
73 				remote-endpoint = <&hdmi_out_con>;
79 		compatible = "gpio-leds";
87 	reg_gmac_3v3: gmac-3v3 {
88 		compatible = "regulator-fixed";
89 		regulator-name = "gmac-3v3";
90 		regulator-min-microvolt = <3300000>;
91 		regulator-max-microvolt = <3300000>;
92 		regulator-boot-on;
93 		enable-active-high;
98 	reg_usb1_vbus: usb1-vbus {
99 		compatible = "regulator-fixed";
100 		regulator-name = "usb1-vbus";
101 		regulator-min-microvolt = <5000000>;
102 		regulator-max-microvolt = <5000000>;
103 		regulator-boot-on;
104 		enable-active-high;
110 		compatible = "mmc-pwrseq-simple";
111 		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
128 	pinctrl-names = "default";
129 	pinctrl-0 = <&rgmii_pins>;
130 	phy-mode = "rgmii";
131 	phy-handle = <&ext_rgmii_phy>;
132 	phy-supply = <&reg_gmac_3v3>;
137 	hvcc-supply = <&reg_dldo1>;
143 		remote-endpoint = <&hdmi_con_in>;
148 	ext_rgmii_phy: ethernet-phy@1 {
149 		compatible = "ethernet-phy-ieee802.3-c22";
155 	pinctrl-names = "default";
156 	pinctrl-0 = <&mmc0_pins>;
157 	vmmc-supply = <&reg_dcdc1>;
158 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
159 	disable-wp;
160 	bus-width = <4>;
165 	pinctrl-names = "default";
166 	pinctrl-0 = <&mmc1_pins>;
167 	vmmc-supply = <&reg_dldo2>;
168 	vqmmc-supply = <&reg_dldo4>;
169 	mmc-pwrseq = <&wifi_pwrseq>;
170 	bus-width = <4>;
171 	non-removable;
187 		compatible = "x-powers,axp803";
189 		interrupt-parent = <&r_intc>;
197 	regulator-min-microvolt = <2800000>;
198 	regulator-max-microvolt = <2800000>;
199 	regulator-name = "afvcc-csi";
203 	regulator-always-on;
204 	regulator-min-microvolt = <1800000>;
205 	regulator-max-microvolt = <3300000>;
206 	regulator-name = "vcc-pl";
210 	regulator-always-on;
211 	regulator-min-microvolt = <3000000>;
212 	regulator-max-microvolt = <3000000>;
213 	regulator-name = "vcc-pll-avcc";
217 	regulator-always-on;
218 	regulator-min-microvolt = <3300000>;
219 	regulator-max-microvolt = <3300000>;
220 	regulator-name = "vcc-3v3";
224 	regulator-always-on;
225 	regulator-min-microvolt = <1040000>;
226 	regulator-max-microvolt = <1300000>;
227 	regulator-name = "vdd-cpux";
233 	regulator-always-on;
234 	regulator-min-microvolt = <1500000>;
235 	regulator-max-microvolt = <1500000>;
236 	regulator-name = "vcc-dram";
240 	regulator-always-on;
241 	regulator-min-microvolt = <1100000>;
242 	regulator-max-microvolt = <1100000>;
243 	regulator-name = "vdd-sys";
247 	regulator-min-microvolt = <3300000>;
248 	regulator-max-microvolt = <3300000>;
249 	regulator-name = "vcc-hdmi-dsi";
253 	regulator-min-microvolt = <3300000>;
254 	regulator-max-microvolt = <3300000>;
255 	regulator-name = "vcc-wifi";
259 	regulator-min-microvolt = <3300000>;
260 	regulator-max-microvolt = <3300000>;
261 	regulator-name = "avdd-csi";
265 	regulator-min-microvolt = <3300000>;
266 	regulator-max-microvolt = <3300000>;
267 	regulator-name = "vcc-wifi-io";
271 	regulator-name = "usb0-vbus";
276 	regulator-min-microvolt = <1800000>;
277 	regulator-max-microvolt = <1800000>;
278 	regulator-name = "cpvdd";
282 	regulator-min-microvolt = <1500000>;
283 	regulator-max-microvolt = <1800000>;
284 	regulator-name = "dvdd-csi";
288 	regulator-min-microvolt = <1200000>;
289 	regulator-max-microvolt = <1200000>;
290 	regulator-name = "vcc-1v2-hsic";
299 	regulator-always-on;
300 	regulator-min-microvolt = <1100000>;
301 	regulator-max-microvolt = <1100000>;
302 	regulator-name = "vdd-cpus";
306 	regulator-name = "vcc-rtc";
310 	vcc-hdmi-supply = <&reg_dldo1>;
316 	spi-flash@0 {
317 		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
319 		spi-max-frequency = <80000000>;
320 		m25p,fast-read;
327 	pinctrl-names = "default";
328 	pinctrl-0 = <&uart0_pb_pins>;
334 	pinctrl-names = "default";
335 	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
339 /* On Pi-2 connector, RTS/CTS optional */
341 	pinctrl-names = "default";
342 	pinctrl-0 = <&uart2_pins>;
346 /* On Pi-2 connector, RTS/CTS optional */
348 	pinctrl-names = "default";
349 	pinctrl-0 = <&uart3_pins>;
353 /* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
355 	pinctrl-names = "default";
356 	pinctrl-0 = <&uart4_pins>;
366 	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
367 	usb0_vbus-supply = <&reg_drivevbus>;
368 	usb1_vbus-supply = <&reg_usb1_vbus>;