arm/dts/sun4i-a10-marsboard.dts

5  * This file is dual-licensed: you can use it either under the terms
44 /dts-v1/;
45 #include "sun4i-a10.dtsi"
46 #include "sunxi-common-regulators.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
51 	model = "HAOYU Electronics Marsboard A10";
52 	compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
59 		stdout-path = "serial0:115200n8";
63 		compatible = "gpio-leds";
107 &emac {
127 	phy1: ethernet-phy@1 {
133 	vmmc-supply = <&reg_vcc3v3>;
134 	bus-width = <4>;
135 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
152 	usb0_id_detect_pin: usb0-id-detect-pin {
155 		bias-pull-up;
168 	pinctrl-names = "default";
169 	pinctrl-0 = <&spi0_pi_pins>,
175 	pinctrl-names = "default";
176 	pinctrl-0 = <&uart0_pb_pins>;
186 	pinctrl-names = "default";
187 	pinctrl-0 = <&usb0_id_detect_pin>;
188 	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
189 	usb1_vbus-supply = <&reg_usb1_vbus>;
190 	usb2_vbus-supply = <&reg_usb2_vbus>;