arm/dts/sun4i-a10-gemei-g9.dts

6  * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun4i-a10.dtsi"
47 #include "sunxi-common-regulators.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
49 #include <dt-bindings/input/input.h>
50 #include <dt-bindings/interrupt-controller/irq.h>
54 	compatible = "gemei,g9", "allwinner,sun4i-a10";
61 		stdout-path = "serial0:115200n8";
68  *   AXP battery management
71  *   Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
74 	/* PH15 controls power to external amplifier (ft2012q) */
75 	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
80 	cpu-supply = <&reg_dcdc2>;
94 	axp209: pmic@34 {  label
100 #include "axp209.dtsi"
109 		interrupt-parent = <&pio>;
115 	vref-supply = <&reg_ldo2>;
119 	button-158 {
126 	button-349 {
133 	button-1142 {
142 	vmmc-supply = <&reg_vcc3v3>;
143 	bus-width = <4>;
144 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
149 	regulator-always-on;
150 	regulator-min-microvolt = <1000000>;
151 	regulator-max-microvolt = <1400000>;
152 	regulator-name = "vdd-cpu";
156 	regulator-always-on;
157 	regulator-min-microvolt = <1250000>;
158 	regulator-max-microvolt = <1250000>;
159 	regulator-name = "vdd-int-dll";
163 	regulator-name = "vdd-rtc";
167 	regulator-always-on;
168 	regulator-min-microvolt = <3000000>;
169 	regulator-max-microvolt = <3000000>;
170 	regulator-name = "avcc";
183 	pinctrl-names = "default";
184 	pinctrl-0 = <&uart0_pb_pins>;
189 	usb1_vbus-supply = <&reg_usb1_vbus>;
190 	usb2_vbus-supply = <&reg_usb2_vbus>;