arm/dts/rk3399-puma.dtsi

1 // SPDX-License-Identifier: GPL-2.0+ OR X11
6 #include <dt-bindings/pwm/pwm.h>
10 	model = "Theobroma Systems RK3399-Q7 SoM";
11 	compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399";
14 		u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
15 		u-boot,mmc-env-offset = <0x4000>;      /* @  16KB */
16 		u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
17 		u-boot,boot-led = "module_led";
18 		sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
22 		stdout-path = "serial0:115200n8";
23 		u-boot,spl-boot-order = \
24 			"same-as-spl", &spiflash, &sdhci, &sdmmc;
33 		compatible = "gpio-leds";
34 		pinctrl-names = "default";
35 		pinctrl-0 = <&leds_pins_puma>;
39 			gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
40 			linux,default-trigger = "heartbeat";
45 			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
46 			linux,default-trigger = "mmc0";
50 	clkin_gmac: external-gmac-clock {
51 		compatible = "fixed-clock";
52 		clock-frequency = <125000000>;
53 		clock-output-names = "clkin_gmac";
54 		#clock-cells = <0>;
57 	dw_hdmi_audio: dw-hdmi-audio {
59 		compatible = "rockchip,dw-hdmi-audio";
60 		#sound-dai-cells = <0>;
63 	hdmi_codec: hdmi-codec {
64 		compatible = "simple-audio-card";
65 		simple-audio-card,format = "i2s";
66 		simple-audio-card,mclk-fs = <256>;
67 		simple-audio-card,name = "HDMI-CODEC";
69 		simple-audio-card,cpu {
70 			sound-dai = <&i2s2>;
73 		simple-audio-card,codec {
74 			sound-dai = <&hdmi>;
78 	hdmi_sound: hdmi-sound {
80 		compatible = "simple-audio-card";
81 		simple-audio-card,format = "i2s";
82 		simple-audio-card,mclk-fs = <256>;
83 		simple-audio-card,name = "rockchip,hdmi";
85 		simple-audio-card,cpu {
86 			sound-dai = <&i2s2>;
88 		simple-audio-card,codec {
89 			sound-dai = <&hdmi>;
94 		compatible = "regulator-fixed";
95 		regulator-name = "usbhub_enable";
96 		enable-active-low;
98 		pinctrl-names = "default";
99 		pinctrl-0 = <&host_vbus_drv>;
100 		regulator-boot-on;
101 		regulator-min-microvolt = <3300000>;
102 		regulator-max-microvolt = <3300000>;
106 	 * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
107 	 * eMMC and SPI flash powered-down initially (in fact it keeps the
112 		compatible = "regulator-fixed";
113 		u-boot,dm-pre-reloc;
114 		regulator-name = "bios_enable";
115 		enable-active-high;
117 		regulator-always-on;
118 		regulator-boot-on;
119 		regulator-min-microvolt = <1800000>;
120 		regulator-max-microvolt = <1800000>;
123 	vccadc_ref: vccadc-ref {
124 		compatible = "regulator-fixed";
125 		regulator-name = "vcc1v8_sys";
126 		regulator-always-on;
127 		regulator-boot-on;
128 		regulator-min-microvolt = <1800000>;
129 		regulator-max-microvolt = <1800000>;
132 	vcc3v3_sys: vcc3v3-sys {
133 		compatible = "regulator-fixed";
134 		regulator-name = "vcc3v3_sys";
135 		regulator-always-on;
136 		regulator-boot-on;
137 		regulator-min-microvolt = <3300000>;
138 		regulator-max-microvolt = <3300000>;
141 	vcc5v0_otg: vcc5v0-otg-regulator {
142 		compatible = "regulator-fixed";
143 		enable-active-high;
145 		pinctrl-names = "default";
146 		pinctrl-0 = <&otg_vbus_drv>;
147 		regulator-name = "vcc5v0_otg";
148 		regulator-always-on;
151 	vcc5v0_sys: vcc5v0-sys {
152 		compatible = "regulator-fixed";
153 		regulator-name = "vcc5v0_sys";
154 		regulator-always-on;
155 		regulator-boot-on;
156 		regulator-min-microvolt = <5000000>;
157 		regulator-max-microvolt = <5000000>;
160 	vcc_phy: vcc-phy-regulator {
161 		compatible = "regulator-fixed";
162 		regulator-name = "vcc_phy";
163 		regulator-always-on;
164 		regulator-boot-on;
167 	vdd_log: vdd-log {
168 		compatible = "pwm-regulator";
170 		regulator-name = "vdd_log";
171 		regulator-min-microvolt = <800000>;
172 		regulator-max-microvolt = <1400000>;
173 		regulator-always-on;
174 		regulator-boot-on;
175 		regulator-init-microvolt = <950000>;
184 	phy-supply = <&vcc_phy>;
185 	phy-mode = "rgmii";
187 	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
188 	snps,reset-active-low;
189 	snps,reset-delays-us = <2 10000 50000>;
190 	assigned-clocks = <&cru SCLK_RMII_SRC>;
191 	assigned-clock-parents = <&clkin_gmac>;
192 	pinctrl-names = "default";
193 	pinctrl-0 = <&rgmii_pins>;
200 	#sound-dai-cells = <0>;
206 	i2c-scl-rising-time-ns = <168>;
207 	i2c-scl-falling-time-ns = <4>;
208 	clock-frequency = <400000>;
214 		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
215 		vin-supply = <&vcc5v0_sys>;
216 		regulator-compatible = "fan53555-reg";
217 		regulator-name = "vdd_gpu";
218 		regulator-min-microvolt = <600000>;
219 		regulator-max-microvolt = <1230000>;
220 		regulator-ramp-delay = <1000>;
221 		fcs,suspend-voltage-selector = <1>;
222 		regulator-always-on;
223 		regulator-boot-on;
224 		regulator-initial-state = <3>;
225 			regulator-state-mem {
226 			regulator-off-in-suspend;
233 		interrupt-parent = <&gpio1>;
235 		pinctrl-names = "default";
236 		pinctrl-0 = <&pmic_int_l>;
237 		rockchip,system-power-controller;
238 		wakeup-source;
239 		#clock-cells = <1>;
240 		clock-output-names = "xin32k", "rk808-clkout2";
242 		vcc1-supply = <&vcc5v0_sys>;
243 		vcc2-supply = <&vcc5v0_sys>;
244 		vcc3-supply = <&vcc5v0_sys>;
245 		vcc4-supply = <&vcc5v0_sys>;
246 		vcc6-supply = <&vcc5v0_sys>;
247 		vcc7-supply = <&vcc5v0_sys>;
248 		vcc8-supply = <&vcc3v3_sys>;
249 		vcc9-supply = <&vcc5v0_sys>;
250 		vcc10-supply = <&vcc5v0_sys>;
251 		vcc11-supply = <&vcc5v0_sys>;
252 		vcc12-supply = <&vcc3v3_sys>;
253 		vddio-supply = <&vcc1v8_pmu>;
257 				regulator-always-on;
258 				regulator-boot-on;
259 				regulator-min-microvolt = <750000>;
260 				regulator-max-microvolt = <1350000>;
261 				regulator-ramp-delay = <6001>;
262 				regulator-name = "vdd_center";
263 				regulator-state-mem {
264 					regulator-off-in-suspend;
269 				regulator-always-on;
270 				regulator-boot-on;
271 				regulator-min-microvolt = <750000>;
272 				regulator-max-microvolt = <1350000>;
273 				regulator-ramp-delay = <6001>;
274 				regulator-name = "vdd_cpu_l";
275 				regulator-state-mem {
276 					regulator-off-in-suspend;
281 				regulator-always-on;
282 				regulator-boot-on;
283 				regulator-name = "vcc_ddr";
284 				regulator-state-mem {
285 					regulator-on-in-suspend;
290 				regulator-always-on;
291 				regulator-boot-on;
292 				regulator-min-microvolt = <1800000>;
293 				regulator-max-microvolt = <1800000>;
294 				regulator-name = "vcc_1v8";
295 				regulator-state-mem {
296 					regulator-on-in-suspend;
297 					regulator-suspend-microvolt = <1800000>;
302 				regulator-boot-on;
303 				regulator-min-microvolt = <1800000>;
304 				regulator-max-microvolt = <1800000>;
305 				regulator-name = "vcc_ldo1";
306 				regulator-state-mem {
307 					regulator-off-in-suspend;
312 				regulator-always-on;
313 				regulator-boot-on;
314 				regulator-min-microvolt = <1800000>;
315 				regulator-max-microvolt = <1800000>;
316 				regulator-name = "vcc1v8_hdmi";
317 				regulator-state-mem {
318 					regulator-off-in-suspend;
323 				regulator-always-on;
324 				regulator-boot-on;
325 				regulator-min-microvolt = <1800000>;
326 				regulator-max-microvolt = <1800000>;
327 				regulator-name = "vcc1v8_pmu";
328 				regulator-state-mem {
329 					regulator-on-in-suspend;
330 					regulator-suspend-microvolt = <1800000>;
335 				regulator-always-on;
336 				regulator-boot-on;
337 				regulator-min-microvolt = <1800000>;
338 				regulator-max-microvolt = <3000000>;
339 				regulator-name = "vcc_sd";
340 				regulator-state-mem {
341 					regulator-on-in-suspend;
342 					regulator-suspend-microvolt = <3000000>;
347 				regulator-boot-on;
348 				regulator-min-microvolt = <3000000>;
349 				regulator-max-microvolt = <3000000>;
350 				regulator-name = "vcc_ldo5";
351 				regulator-state-mem {
352 					regulator-off-in-suspend;
357 				regulator-boot-on;
358 				regulator-min-microvolt = <1500000>;
359 				regulator-max-microvolt = <1500000>;
360 				regulator-name = "vcc_ldo6";
361 				regulator-state-mem {
362 					regulator-off-in-suspend;
367 				regulator-always-on;
368 				regulator-boot-on;
369 				regulator-min-microvolt = <900000>;
370 				regulator-max-microvolt = <900000>;
371 				regulator-name = "vcc0v9_hdmi";
372 				regulator-state-mem {
373 					regulator-off-in-suspend;
378 				regulator-always-on;
379 				regulator-boot-on;
380 				regulator-min-microvolt = <1800000>;
381 				regulator-max-microvolt = <1800000>;
382 				regulator-name = "vcc_efuse";
383 				regulator-state-mem {
384 					regulator-off-in-suspend;
389 				regulator-always-on;
390 				regulator-boot-on;
391 				regulator-name = "vcc3v3_s3";
392 				regulator-state-mem {
393 					regulator-off-in-suspend;
398 				regulator-always-on;
399 				regulator-boot-on;
400 				regulator-name = "vcc3v3_s0";
401 				regulator-state-mem {
402 					regulator-off-in-suspend;
411 	clock-frequency = <400000>;
417 		vsel-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
418 		vin-supply = <&vcc5v0_sys>;
419 		regulator-compatible = "fan53555-reg";
420 		regulator-name = "vdd_cpu_b";
421 		regulator-min-microvolt = <600000>;
422 		regulator-max-microvolt = <1230000>;
423 		regulator-ramp-delay = <1000>;
424 		fcs,suspend-voltage-selector = <1>;
425 		regulator-always-on;
426 		regulator-boot-on;
427 		regulator-initial-state = <3>;
428 			regulator-state-mem {
429 			regulator-off-in-suspend;
436 	rockchip,i2s-broken-burst-len;
437 	rockchip,playback-channels = <8>;
438 	rockchip,capture-channels = <8>;
439 	#sound-dai-cells = <0>;
443 	#sound-dai-cells = <0>;
450 	bt656-supply = <&vcc_1v8>;	/* bt656_gpio2ab_ms */
451 	audio-supply = <&vcc_1v8>;	/* audio_gpio3d4a_ms */
452 	sdmmc-supply = <&vcc_sd>;	/* sdmmc_gpio4b_ms */
453 	gpio1830-supply = <&vcc_1v8>;	/* gpio1833_gpio4cd_ms */
457 	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
458 	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
459 	assigned-clock-rates = <100000000>;
460 	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
461 	num-lanes = <4>;
462 	pinctrl-names = "default";
463 	pinctrl-0 = <&pcie_clkreqn>;
473 	pmu1830-supply = <&vcc_1v8>;
485 	bus-width = <8>;
486 	mmc-hs400-1_8v;
487 	supports-emmc;
488 	non-removable;
489 	keep-power-in-suspend;
490 	mmc-hs400-enhanced-strobe;
495 	u-boot,dm-pre-reloc;
496 	clock-frequency = <150000000>;
497 	max-frequency = <40000000>;
498 	supports-sd;
499 	bus-width = <4>;
500 	cap-mmc-highspeed;
501 	cap-sd-highspeed;
502 	disable-wp;
503 	num-slots = <1>;
504 	vqmmc-supply = <&vcc_sd>;
505 	pinctrl-names = "default";
506 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
536 	tsd,usb-port-power = "usbhub_enable";
544 	u-boot,dm-pre-reloc;
548 	u-boot,dm-pre-reloc;
553 	pinctrl-names = "default";
554 	pinctrl-0 = <&puma_pin_hog>;
559 				/* We need pull-ups on Q7 buttons */
568 		pmic_int_l: pmic-int-l {
581 		otg_vbus_drv: otg-vbus-drv {
586 		host_vbus_drv: host-vbus-drv {
593 		i2c8_xfer_a: i2c8-xfer {
603 	clock-frequency = <400000>;
607 	clock-frequency = <400000>;
611 	clock-frequency = <400000>;
615 	clock-frequency = <400000>;
619 	/* Enable pull-ups, the pins would float otherwise. */
627 	clock-frequency = <400000>;
636 		cooling-min-state = <0>;
637 		cooling-max-state = <9>;
638 		#cooling-cells = <2>;
643 	u-boot,dm-pre-reloc;
644 	pinctrl-names = "default";
645 	pinctrl-0 = <&uart0_xfer &uart0_cts>;
651 	u-boot,dm-pre-reloc;
655 	#address-cells = <1>;
656 	#size-cells = <0>;
659 		u-boot,dm-pre-reloc;
661 		compatible = "spi-flash";
663 		spi-max-frequency = <49500000>;
664 		spi-cpol;
665 		spi-cpha;