arm/dts/rk3368-lion.dts

1 // SPDX-License-Identifier: GPL-2.0+ OR X11
6 /dts-v1/;
8 #include "rk3368-lion-u-boot.dtsi"
9 #include <dt-bindings/input/input.h>
12 	model = "Theobroma Systems RK3368-uQ7 SoM";
13 	compatible = "tsd,rk3368-uq7", "tsd,lion", "rockchip,rk3368";
25 	ext_gmac: gmac-clk {
26 		compatible = "fixed-clock";
27 		clock-frequency = <125000000>;
28 		clock-output-names = "ext_gmac";
29 		#clock-cells = <0>;
32 	vcc_sys: vcc-sys-regulator {
33 		compatible = "regulator-fixed";
34 		regulator-name = "vcc_sys";
35 		regulator-min-microvolt = <5000000>;
36 		regulator-max-microvolt = <5000000>;
37 		regulator-always-on;
38 		regulator-boot-on;
48 	bus-width = <8>;
49 	cap-mmc-highspeed;
50 	clock-frequency = <150000000>;
51 	disable-wp;
52 	keep-power-in-suspend;
53 	non-removable;
54 	num-slots = <1>;
55 	vmmc-supply = <&vcc33_io>;
56 	vqmmc-supply = <&vcc18_io>;
57 	pinctrl-names = "default";
58 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
67 	phy-supply = <&vcc33_io>;
68 	phy-mode = "rgmii";
70 	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
71 	snps,reset-active-low;
72 	snps,reset-delays-us = <2 10000 50000>;
73 	assigned-clocks = <&cru SCLK_MAC>;
74 	assigned-clock-parents = <&ext_gmac>;
75 	pinctrl-names = "default";
76 	pinctrl-0 = <&rgmii_pins>;
84 	rk808: pmic@1b {  label
85 		compatible = "rockchip,rk808";
87 		interrupt-parent = <&gpio0>;
89 		rockchip,system-power-controller;
90 		vcc1-supply = <&vcc_sys>;
91 		vcc2-supply = <&vcc_sys>;
92 		vcc3-supply = <&vcc_sys>;
93 		vcc4-supply = <&vcc_sys>;
94 		vcc6-supply = <&vcc_sys>;
95 		vcc7-supply = <&vcc_sys>;
96 		vcc8-supply = <&vcc_sys>;
97 		vcc9-supply = <&vcc_sys>;
98 		vcc10-supply = <&vcc_sys>;
99 		vcc11-supply = <&vcc_sys>;
100 		vcc12-supply = <&vcc_sys>;
101 		clock-output-names = "xin32k", "rk808-clkout2";
102 		#clock-cells = <1>;
106 				regulator-always-on;
107 				regulator-boot-on;
108 				regulator-min-microvolt = <700000>;
109 				regulator-max-microvolt = <1500000>;
110 				regulator-name = "vdd_cpu";
114 				regulator-always-on;
115 				regulator-boot-on;
116 				regulator-min-microvolt = <700000>;
117 				regulator-max-microvolt = <1500000>;
118 				regulator-name = "vdd_log";
122 				regulator-always-on;
123 				regulator-boot-on;
124 				regulator-name = "vcc_ddr";
128 				regulator-always-on;
129 				regulator-boot-on;
130 				regulator-min-microvolt = <3300000>;
131 				regulator-max-microvolt = <3300000>;
132 				regulator-name = "vcc33_io";
136 				regulator-always-on;
137 				regulator-boot-on;
138 				regulator-min-microvolt = <3300000>;
139 				regulator-max-microvolt = <3300000>;
140 				regulator-name = "vcc33_video";
144 				regulator-always-on;
145 				regulator-boot-on;
146 				regulator-min-microvolt = <1000000>;
147 				regulator-max-microvolt = <1000000>;
148 				regulator-name = "vdd10_pll";
152 				regulator-boot-on;
153 				regulator-min-microvolt = <1800000>;
154 				regulator-max-microvolt = <1800000>;
155 				regulator-name = "vcc18_io";
159 				regulator-always-on;
160 				regulator-boot-on;
161 				regulator-min-microvolt = <1000000>;
162 				regulator-max-microvolt = <1000000>;
163 				regulator-name = "vdd10_video";
167 				regulator-always-on;
168 				regulator-boot-on;
169 				regulator-min-microvolt = <1800000>;
170 				regulator-max-microvolt = <1800000>;
171 				regulator-name = "vcc18_video";
184 	#address-cells = <1>;
185 	#size-cells = <0>;
188 		compatible = "spi-flash";
190 		spi-max-frequency = <49500000>;
191 		spi-cpol;
192 		spi-cpha;