arm/dts/rk3288-tinker.dtsi

2  * This file is dual-licensed: you can use it either under the terms
49 	ext_gmac: external-gmac-clock {
50 		compatible = "fixed-clock";
51 		clock-frequency = <125000000>;
52 		clock-output-names = "ext_gmac";
53 		#clock-cells = <0>;
56 	gpio-keys {
57 		compatible = "gpio-keys";
60 		pinctrl-names = "default";
61 		pinctrl-0 = <&pwrbtn>;
66 			linux,input-type = <1>;
67 			gpio-key,wakeup = <1>;
68 			debounce-interval = <100>;
72 	gpio-leds {
73 		compatible = "gpio-leds";
75 		pwr-led {
77 			linux,default-trigger = "default-on";
80 		act-led {
82 			linux,default-trigger="mmc0";
86 	vcc_sys: vsys-regulator {
87 		compatible = "regulator-fixed";
88 		regulator-name = "vcc_sys";
89 		regulator-min-microvolt = <5000000>;
90 		regulator-max-microvolt = <5000000>;
91 		regulator-always-on;
92 		regulator-boot-on;
100 	vcc_sd: sdmmc-regulator {
101 		compatible = "regulator-fixed";
103 		pinctrl-names = "default";
104 		pinctrl-0 = <&sdmmc_pwr>;
105 		regulator-name = "vcc_sd";
106 		regulator-min-microvolt = <3300000>;
107 		regulator-max-microvolt = <3300000>;
108 		startup-delay-us = <100000>;
109 		vin-supply = <&vcc_io>;
112 	vcc5v0_host: usb-host-regulator {
113 		compatible = "regulator-fixed";
114 		enable-active-high;
116 		pinctrl-names = "default";
117 		pinctrl-0 = <&host_vbus_drv>;
118 		regulator-name = "vcc5v0_host";
119 		regulator-min-microvolt = <5000000>;
120 		regulator-max-microvolt = <5000000>;
121 		regulator-always-on;
126 	cpu0-supply = <&vdd_cpu>;
130 	bus-width = <4>;
131 	cap-mmc-highspeed;
132 	cap-sd-highspeed;
133 	card-detect-delay = <200>;
134 	disable-wp;			/* wp not hooked up */
135 	num-slots = <1>;
136 	pinctrl-names = "default";
137 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
139 	supports-sd;
140 	vmmc-supply = <&vcc_sd>;
141 	vqmmc-supply = <&vccio_sd>;
145 	mali-supply = <&vdd_gpu>;
150 	phy-supply = <&vcc33_lan>;
151 	phy-mode = "rgmii";
153 	snps,reset-gpio = <&gpio4 7 0>;
154 	snps,reset-active-low;
155 	snps,reset-delays-us = <0 10000 1000000>;
156 	assigned-clocks = <&cru SCLK_MAC>;
157 	assigned-clock-parents = <&ext_gmac>;
158 	pinctrl-names = "default";
159 	pinctrl-0 = <&rgmii_pins>;
166 	ddc-i2c-bus = <&i2c5>;
172 	clock-frequency = <400000>;
177 		interrupt-parent = <&gpio0>;
179 		pinctrl-names = "default";
180 		pinctrl-0 = <&pmic_int &global_pwroff>;
181 		rockchip,system-power-controller;
182 		wakeup-source;
183 		#clock-cells = <1>;
184 		clock-output-names = "xin32k", "rk808-clkout2";
186 		vcc1-supply = <&vcc_sys>;
187 		vcc2-supply = <&vcc_sys>;
188 		vcc3-supply = <&vcc_sys>;
189 		vcc4-supply = <&vcc_sys>;
190 		vcc6-supply = <&vcc_sys>;
191 		vcc7-supply = <&vcc_sys>;
192 		vcc8-supply = <&vcc_18>;
193 		vcc9-supply = <&vcc_io>;
194 		vcc10-supply = <&vcc_io>;
195 		vcc11-supply = <&vcc_sys>;
196 		vcc12-supply = <&vcc_io>;
197 		vddio-supply = <&vcc18_ldo1>;
201 				regulator-always-on;
202 				regulator-boot-on;
203 				regulator-min-microvolt = <750000>;
204 				regulator-max-microvolt = <1350000>;
205 				regulator-name = "vdd_arm";
206 				regulator-state-mem {
207 					regulator-off-in-suspend;
212 				regulator-always-on;
213 				regulator-boot-on;
214 				regulator-min-microvolt = <850000>;
215 				regulator-max-microvolt = <1250000>;
216 				regulator-name = "vdd_gpu";
217 				regulator-state-mem {
218 					regulator-on-in-suspend;
219 					regulator-suspend-microvolt = <1000000>;
224 				regulator-always-on;
225 				regulator-boot-on;
226 				regulator-name = "vcc_ddr";
227 				regulator-state-mem {
228 					regulator-on-in-suspend;
233 				regulator-always-on;
234 				regulator-boot-on;
235 				regulator-min-microvolt = <3300000>;
236 				regulator-max-microvolt = <3300000>;
237 				regulator-name = "vcc_io";
238 				regulator-state-mem {
239 					regulator-on-in-suspend;
240 					regulator-suspend-microvolt = <3300000>;
245 				regulator-always-on;
246 				regulator-boot-on;
247 				regulator-min-microvolt = <1800000>;
248 				regulator-max-microvolt = <1800000>;
249 				regulator-name = "vcc18_ldo1";
250 				regulator-state-mem {
251 					regulator-on-in-suspend;
252 					regulator-suspend-microvolt = <1800000>;
257 				regulator-always-on;
258 				regulator-boot-on;
259 				regulator-min-microvolt = <3300000>;
260 				regulator-max-microvolt = <3300000>;
261 				regulator-name = "vcc33_mipi";
262 				regulator-state-mem {
263 					regulator-off-in-suspend;
268 				regulator-always-on;
269 				regulator-boot-on;
270 				regulator-min-microvolt = <1000000>;
271 				regulator-max-microvolt = <1000000>;
272 				regulator-name = "vdd_10";
273 				regulator-state-mem {
274 					regulator-on-in-suspend;
275 					regulator-suspend-microvolt = <1000000>;
280 				regulator-always-on;
281 				regulator-boot-on;
282 				regulator-min-microvolt = <1800000>;
283 				regulator-max-microvolt = <1800000>;
284 				regulator-name = "vcc18_codec";
285 				regulator-state-mem {
286 					regulator-on-in-suspend;
287 					regulator-suspend-microvolt = <1800000>;
292 				regulator-always-on;
293 				regulator-boot-on;
294 				regulator-min-microvolt = <1800000>;
295 				regulator-max-microvolt = <3300000>;
296 				regulator-name = "vccio_sd";
297 				regulator-state-mem {
298 					regulator-on-in-suspend;
299 					regulator-suspend-microvolt = <3300000>;
304 				regulator-always-on;
305 				regulator-boot-on;
306 				regulator-min-microvolt = <1000000>;
307 				regulator-max-microvolt = <1000000>;
308 				regulator-name = "vdd10_lcd";
309 				regulator-state-mem {
310 					regulator-on-in-suspend;
311 					regulator-suspend-microvolt = <1000000>;
316 				regulator-always-on;
317 				regulator-boot-on;
318 				regulator-min-microvolt = <1800000>;
319 				regulator-max-microvolt = <1800000>;
320 				regulator-name = "vcc_18";
321 				regulator-state-mem {
322 					regulator-on-in-suspend;
323 					regulator-suspend-microvolt = <1800000>;
328 				regulator-always-on;
329 				regulator-boot-on;
330 				regulator-min-microvolt = <1800000>;
331 				regulator-max-microvolt = <1800000>;
332 				regulator-name = "vcc18_lcd";
333 				regulator-state-mem {
334 					regulator-on-in-suspend;
335 					regulator-suspend-microvolt = <1800000>;
340 				regulator-always-on;
341 				regulator-boot-on;
342 				regulator-name = "vcc33_sd";
343 				regulator-state-mem {
344 					regulator-on-in-suspend;
349 				regulator-always-on;
350 				regulator-boot-on;
351 				regulator-name = "vcc33_lan";
352 				regulator-state-mem {
353 					regulator-on-in-suspend;
364 		#sound-dai-cells = <0>;
366 		interrupt-parent = <&gpio6>;
368 		nuvoton,jkdet-enable = <1>;
369 		nuvoton,jkdet-pull-enable = <1>;
370 		nuvoton,jkdet-pull-up = <0>;
371 		nuvoton,jkdet-polarity = <1>;
372 		nuvoton,vref-impedance = <2>;
373 		nuvoton,micbias-voltage = <6>;
374 		nuvoton,sar-threshold-num = <4>;
375 		nuvoton,sar-threshold = <0xa 0x14 0x26 0x73>;
376 		nuvoton,sar-hysteresis = <0>;
377 		nuvoton,sar-voltage = <6>;
378 		nuvoton,sar-compare-time = <0>;
379 		nuvoton,sar-sampling-time = <0>;
380 		nuvoton,short-key-debounce = <3>;
381 		nuvoton,jack-insert-debounce = <7>;
382 		nuvoton,jack-eject-debounce = <7>;
383 		clock-names = "mclk";
401 	vref-supply = <&vcc18_ldo1>;
426 	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
427 	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
464 	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
465 		drive-strength = <8>;
468 	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
469 		bias-pull-up;
470 		drive-strength = <8>;
474 		bl_en: bl-en {
486 		eth_phy_pwr: eth-phy-pwr {
492 		pmic_int: pmic-int {
500 		 * high-speed mode on EVB board so bump up to 8ma.
502 		sdmmc_bus4: sdmmc-bus4 {
509 		sdmmc_clk: sdmmc-clk {
513 		sdmmc_cmd: sdmmc-cmd {
517 		sdmmc_pwr: sdmmc-pwr {
523 		host_vbus_drv: host-vbus-drv {
527 		pwr_3g: pwr-3g {