arm/dts/rk3288-popmetal.dtsi

2  * This file is dual-licensed: you can use it either under the terms
49 	ext_gmac: external-gmac-clock {
50 		compatible = "fixed-clock";
51 		clock-frequency = <125000000>;
52 		clock-output-names = "ext_gmac";
53 		#clock-cells = <0>;
56 	gpio-keys {
57 		compatible = "gpio-keys";
60 		pinctrl-names = "default";
61 		pinctrl-0 = <&pwrbtn>;
66 			linux,input-type = <1>;
67 			wakeup-source;
68 			debounce-interval = <100>;
72 	io_domains: io-domains {
73 		compatible = "rockchip,rk3288-io-voltage-domain";
76 		audio-supply = <&vcca_33>;
77 		bb-supply = <&vcc_io>;
78 		dvp-supply = <&vcc18_dvp>;
79 		flash0-supply = <&vcc_flash>;
80 		flash1-supply = <&vcc_lan>;
81 		gpio30-supply = <&vcc_io>;
82 		gpio1830-supply = <&vcc_io>;
83 		lcdc-supply = <&vcc_io>;
84 		sdcard-supply = <&vccio_sd>;
85 		wifi-supply = <&vccio_wl>;
88 	ir: ir-receiver {
89 		compatible = "gpio-ir-receiver";
91 		pinctrl-names = "default";
92 		pinctrl-0 = <&ir_int>;
95 	vcc_flash: flash-regulator {
96 		compatible = "regulator-fixed";
97 		regulator-name = "vcc_flash";
98 		regulator-min-microvolt = <1800000>;
99 		regulator-max-microvolt = <1800000>;
100 		vin-supply = <&vcc_io>;
103 	vcc_sd: sdmmc-regulator {
104 		compatible = "regulator-fixed";
106 		pinctrl-names = "default";
107 		pinctrl-0 = <&sdmmc_pwr>;
108 		regulator-name = "vcc_sd";
109 		regulator-min-microvolt = <3300000>;
110 		regulator-max-microvolt = <3300000>;
111 		startup-delay-us = <100000>;
112 		vin-supply = <&vcc_io>;
115 	vcc_sys: vsys-regulator {
116 		compatible = "regulator-fixed";
117 		regulator-name = "vcc_sys";
118 		regulator-min-microvolt = <5000000>;
119 		regulator-max-microvolt = <5000000>;
120 		regulator-always-on;
121 		regulator-boot-on;
128 	vcc18_dvp: vcc18-dvp-regulator {
129 		compatible = "regulator-fixed";
130 		regulator-name = "vcc18-dvp";
131 		regulator-min-microvolt = <1800000>;
132 		regulator-max-microvolt = <1800000>;
133 		vin-supply = <&vcc28_dvp>;
136 	vcc28_dvp: vcc28-dvp-regulator {
137 		compatible = "regulator-fixed";
138 		enable-active-high;
140 		pinctrl-names = "default";
141 		pinctrl-0 = <&dvp_pwr>;
142 		regulator-name = "vcc28_dvp";
143 		regulator-min-microvolt = <2800000>;
144 		regulator-max-microvolt = <2800000>;
145 		regulator-always-on;
146 		vin-supply = <&vcc_io>;
149 	vcc5v0_host: usb-host-regulator {
150 		compatible = "regulator-fixed";
151 		enable-active-high;
153 		pinctrl-names = "default";
154 		pinctrl-0 = <&host_vbus_drv>;
155 		regulator-name = "vcc5v0_host";
156 		regulator-min-microvolt = <5000000>;
157 		regulator-max-microvolt = <5000000>;
158 		regulator-always-on;
163 	cpu0-supply = <&vdd_cpu>;
167 	bus-width = <8>;
168 	cap-mmc-highspeed;
169 	disable-wp;
170 	non-removable;
171 	num-slots = <1>;
172 	pinctrl-names = "default";
173 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
174 	vmmc-supply = <&vcc_io>;
175 	vqmmc-supply = <&vcc_flash>;
180 	bus-width = <4>;
181 	cap-mmc-highspeed;
182 	cap-sd-highspeed;
183 	card-detect-delay = <200>;
184 	disable-wp;
185 	num-slots = <1>;
186 	pinctrl-names = "default";
187 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
188 	vmmc-supply = <&vcc_sd>;
189 	vqmmc-supply = <&vccio_sd>;
194 	phy-supply = <&vcc_lan>;
195 	phy-mode = "rgmii";
197 	snps,reset-gpio = <&gpio4 7 0>;
198 	snps,reset-active-low;
199 	snps,reset-delays-us = <0 10000 1000000>;
200 	assigned-clocks = <&cru SCLK_MAC>;
201 	assigned-clock-parents = <&ext_gmac>;
202 	pinctrl-names = "default";
203 	pinctrl-0 = <&rgmii_pins>;
210 	ddc-i2c-bus = <&i2c5>;
216 	clock-frequency = <400000>;
221 		interrupt-parent = <&gpio0>;
223 		pinctrl-names = "default";
224 		pinctrl-0 = <&pmic_int &global_pwroff>;
225 		rockchip,system-power-controller;
226 		wakeup-source;
227 		#clock-cells = <1>;
228 		clock-output-names = "xin32k", "rk808-clkout2";
230 		vcc1-supply = <&vcc_sys>;
231 		vcc2-supply = <&vcc_sys>;
232 		vcc3-supply = <&vcc_sys>;
233 		vcc4-supply = <&vcc_sys>;
234 		vcc6-supply = <&vcc_sys>;
235 		vcc7-supply = <&vcc_sys>;
236 		vcc8-supply = <&vcc_18>;
237 		vcc9-supply = <&vcc_io>;
238 		vcc10-supply = <&vcc_io>;
239 		vcc11-supply = <&vcc_sys>;
240 		vcc12-supply = <&vcc_io>;
241 		vddio-supply = <&vcc_io>;
245 				regulator-always-on;
246 				regulator-boot-on;
247 				regulator-min-microvolt = <750000>;
248 				regulator-max-microvolt = <1350000>;
249 				regulator-name = "vdd_arm";
250 				regulator-state-mem {
251 					regulator-off-in-suspend;
256 				regulator-always-on;
257 				regulator-boot-on;
258 				regulator-min-microvolt = <850000>;
259 				regulator-max-microvolt = <1250000>;
260 				regulator-name = "vdd_gpu";
261 				regulator-state-mem {
262 					regulator-on-in-suspend;
263 					regulator-suspend-microvolt = <1000000>;
268 				regulator-always-on;
269 				regulator-boot-on;
270 				regulator-name = "vcc_ddr";
271 				regulator-state-mem {
272 					regulator-on-in-suspend;
277 				regulator-always-on;
278 				regulator-boot-on;
279 				regulator-min-microvolt = <3300000>;
280 				regulator-max-microvolt = <3300000>;
281 				regulator-name = "vcc_io";
282 				regulator-state-mem {
283 					regulator-on-in-suspend;
284 					regulator-suspend-microvolt = <3300000>;
289 				regulator-always-on;
290 				regulator-boot-on;
291 				regulator-min-microvolt = <3300000>;
292 				regulator-max-microvolt = <3300000>;
293 				regulator-name = "vcc_lan";
294 				regulator-state-mem {
295 					regulator-on-in-suspend;
296 					regulator-suspend-microvolt = <3300000>;
301 				regulator-always-on;
302 				regulator-boot-on;
303 				regulator-min-microvolt = <3300000>;
304 				regulator-max-microvolt = <3300000>;
305 				regulator-name = "vccio_sd";
306 				regulator-state-mem {
307 					regulator-off-in-suspend;
312 				regulator-always-on;
313 				regulator-boot-on;
314 				regulator-min-microvolt = <1000000>;
315 				regulator-max-microvolt = <1000000>;
316 				regulator-name = "vdd_10";
317 				regulator-state-mem {
318 					regulator-on-in-suspend;
319 					regulator-suspend-microvolt = <1000000>;
324 				regulator-always-on;
325 				regulator-boot-on;
326 				regulator-min-microvolt = <1800000>;
327 				regulator-max-microvolt = <1800000>;
328 				regulator-name = "vcc18_lcd";
329 				regulator-state-mem {
330 					regulator-on-in-suspend;
331 					regulator-suspend-microvolt = <1800000>;
336 				regulator-always-on;
337 				regulator-min-microvolt = <1800000>;
338 				regulator-max-microvolt = <3300000>;
339 				regulator-name = "ldo5";
343 				regulator-always-on;
344 				regulator-boot-on;
345 				regulator-min-microvolt = <1000000>;
346 				regulator-max-microvolt = <1000000>;
347 				regulator-name = "vdd10_lcd";
348 				regulator-state-mem {
349 					regulator-on-in-suspend;
350 					regulator-suspend-microvolt = <1000000>;
355 				regulator-always-on;
356 				regulator-boot-on;
357 				regulator-min-microvolt = <1800000>;
358 				regulator-max-microvolt = <1800000>;
359 				regulator-name = "vcc_18";
360 				regulator-state-mem {
361 					regulator-on-in-suspend;
362 					regulator-suspend-microvolt = <1800000>;
367 				regulator-always-on;
368 				regulator-boot-on;
369 				regulator-min-microvolt = <3300000>;
370 				regulator-max-microvolt = <3300000>;
371 				regulator-name = "vcca_33";
372 				regulator-state-mem {
373 					regulator-on-in-suspend;
374 					regulator-suspend-microvolt = <3300000>;
379 				regulator-always-on;
380 				regulator-boot-on;
381 				regulator-name = "vccio_wl";
382 				regulator-state-mem {
383 					regulator-on-in-suspend;
388 				regulator-always-on;
389 				regulator-boot-on;
390 				regulator-name = "vcc_lcd";
391 				regulator-state-mem {
392 					regulator-on-in-suspend;
401 	clock-frequency = <400000>;
404 		compatible = "asahi-kasei,ak8975";
406 		interrupt-parent = <&gpio8>;
408 		pinctrl-names = "default";
409 		pinctrl-0 = <&comp_int>;
413 		compatible = "st,l3g4200d-gyro";
414 		st,drdy-int-pin = <2>;
421 		interrupt-parent = <&gpio8>;
423 		pinctrl-names = "default";
424 		pinctrl-0 = <&gsensor_int>;
446 		comp_int: comp-int {
458 		dvp_pwr: dvp-pwr {
464 		ir_int: ir-int {
470 		gsensor_int: gsensor-int {
476 		pmic_int: pmic-int {
482 		sdmmc_pwr: sdmmc-pwr {
488 		host_vbus_drv: host-vbus-drv {
499 	rockchip,hw-tshut-mode = <0>;
500 	rockchip,hw-tshut-polarity = <0>;
541 	vbus-supply = <&vcc5v0_host>;