arm/dts/r8a77995-draak.dts

1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
24 		stdout-path = "serial0:115200n8";
28 		compatible = "vga-connector";
32 				remote-endpoint = <&adv7123_out>;
37 	vga-encoder {
41 			#address-cells = <1>;
42 			#size-cells = <0>;
47 					remote-endpoint = <&du_out_rgb>;
53 					remote-endpoint = <&vga_in>;
59 	composite-in {
60 		compatible = "composite-video-connector";
64 				remote-endpoint = <&adv7180_in>;
69 	hdmi-in {
70 		compatible = "hdmi-connector";
75 				remote-endpoint = <&adv7612_in>;
87 		compatible = "regulator-fixed";
88 		regulator-name = "fixed-1.8V";
89 		regulator-min-microvolt = <1800000>;
90 		regulator-max-microvolt = <1800000>;
91 		regulator-boot-on;
92 		regulator-always-on;
96 		compatible = "regulator-fixed";
97 		regulator-name = "fixed-3.3V";
98 		regulator-min-microvolt = <3300000>;
99 		regulator-max-microvolt = <3300000>;
100 		regulator-boot-on;
101 		regulator-always-on;
105 		compatible = "fixed-clock";
106 		#clock-cells = <0>;
107 		clock-frequency = <74250000>;
112 	clock-frequency = <48000000>;
156 		power-source = <1800>;
162 		power-source = <1800>;
170 	vin4_pins_cvbs: vin4 {
172 		function = "vin4";
177 	pinctrl-0 = <&i2c0_pins>;
178 	pinctrl-names = "default";
187 	composite-in@20 {
192 			#address-cells = <1>;
193 			#size-cells = <0>;
198 					remote-endpoint = <&composite_con_in>;
206 				 * The VIN4 video input path is shared between
207 				 * CVBS and HDMI inputs through SW[49-53]
211 				 * VIN4 here.
214 					remote-endpoint = <&vin4_in>;
221 	hdmi-decoder@4c {
224 		default-input = <0>;
227 			#address-cells = <1>;
228 			#size-cells = <0>;
234 					remote-endpoint = <&hdmi_con_in>;
242 				 * The VIN4 video input path is shared between
243 				 * CVBS and HDMI inputs through SW[49-53]
250 					pclk-sample = <0>;
251 					hsync-active = <0>;
252 					vsync-active = <0>;
260 	pinctrl-0 = <&i2c1_pins>;
261 	pinctrl-names = "default";
266 	pinctrl-0 = <&du_pins>;
267 	pinctrl-names = "default";
273 	clock-names = "du.0", "du.1", "dclkin.0";
278 				remote-endpoint = <&adv7123_in>;
293 	pinctrl-0 = <&avb0_pins>;
294 	pinctrl-names = "default";
295 	renesas,no-ether-link;
296 	phy-handle = <&phy0>;
297 	phy-mode = "rgmii-txid";
300 	phy0: ethernet-phy@0 {
301 		rxc-skew-ps = <1500>;
303 		interrupt-parent = <&gpio5>;
309 	pinctrl-0 = <&scif2_pins>;
310 	pinctrl-names = "default";
316 	/* used for on-board eMMC */
317 	pinctrl-0 = <&sdhi2_pins>;
318 	pinctrl-1 = <&sdhi2_pins_uhs>;
319 	pinctrl-names = "default", "state_uhs";
321 	vmmc-supply = <&reg_3p3v>;
322 	vqmmc-supply = <&reg_1p8v>;
323 	bus-width = <8>;
324 	mmc-hs200-1_8v;
325 	non-removable;
330 	pinctrl-0 = <&usb0_pins>;
331 	pinctrl-names = "default";
337 	pinctrl-0 = <&pwm0_pins>;
338 	pinctrl-names = "default";
344 	pinctrl-0 = <&pwm1_pins>;
345 	pinctrl-names = "default";
351 	timeout-sec = <60>;
355 &vin4 {
356 	pinctrl-0 = <&vin4_pins_cvbs>;
357 	pinctrl-names = "default";
362 		#address-cells = <1>;
363 		#size-cells = <0>;
369 				remote-endpoint = <&adv7180_out>;