arm/dts/r8a7794-alt.dts

1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
26 		stdout-path = "serial0:115200n8";
34 	d3_3v: regulator-d3-3v {
35 		compatible = "regulator-fixed";
36 		regulator-name = "D3.3V";
37 		regulator-min-microvolt = <3300000>;
38 		regulator-max-microvolt = <3300000>;
39 		regulator-boot-on;
40 		regulator-always-on;
43 	vcc_sdhi0: regulator-vcc-sdhi0 {
44 		compatible = "regulator-fixed";
46 		regulator-name = "SDHI0 Vcc";
47 		regulator-min-microvolt = <3300000>;
48 		regulator-max-microvolt = <3300000>;
51 		enable-active-high;
54 	vccq_sdhi0: regulator-vccq-sdhi0 {
55 		compatible = "regulator-gpio";
57 		regulator-name = "SDHI0 VccQ";
58 		regulator-min-microvolt = <1800000>;
59 		regulator-max-microvolt = <3300000>;
62 		gpios-states = <1>;
67 	vcc_sdhi1: regulator-vcc-sdhi1 {
68 		compatible = "regulator-fixed";
70 		regulator-name = "SDHI1 Vcc";
71 		regulator-min-microvolt = <3300000>;
72 		regulator-max-microvolt = <3300000>;
75 		enable-active-high;
78 	vccq_sdhi1: regulator-vccq-sdhi1 {
79 		compatible = "regulator-gpio";
81 		regulator-name = "SDHI1 VccQ";
82 		regulator-min-microvolt = <1800000>;
83 		regulator-max-microvolt = <3300000>;
86 		gpios-states = <1>;
92 		#address-cells = <1>;
93 		#size-cells = <1>;
96 	vga-encoder {
100 			#address-cells = <1>;
101 			#size-cells = <0>;
106 					remote-endpoint = <&du_out_rgb1>;
112 					remote-endpoint = <&vga_in>;
119 		compatible = "vga-connector";
123 				remote-endpoint = <&adv7123_out>;
128 	x2_clk: x2-clock {
129 		compatible = "fixed-clock";
130 		#clock-cells = <0>;
131 		clock-frequency = <74250000>;
134 	x13_clk: x13-clock {
135 		compatible = "fixed-clock";
136 		#clock-cells = <0>;
137 		clock-frequency = <148500000>;
140 	gpioi2c1: i2c-9 {
141 		#address-cells = <1>;
142 		#size-cells = <0>;
143 		compatible = "i2c-gpio";
145 		scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
146 		sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
149 	gpioi2c4: i2c-10 {
150 		#address-cells = <1>;
151 		#size-cells = <0>;
152 		compatible = "i2c-gpio";
154 		scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
155 		sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
156 		i2c-gpio,delay-us = <5>;
162 	i2chdmi: i2c-11 {
163 		compatible = "i2c-demux-pinctrl";
164 		i2c-parent = <&i2c1>, <&gpioi2c1>;
165 		i2c-bus-name = "i2c-hdmi";
166 		#address-cells = <1>;
167 		#size-cells = <0>;
169 		composite-in@20 {
176 					bus-width = <8>;
177 					remote-endpoint = <&vin0ep>;
193 	i2cexio4: i2c-14 {
194 		compatible = "i2c-demux-pinctrl";
195 		i2c-parent = <&i2c4>, <&gpioi2c4>;
196 		i2c-bus-name = "i2c-exio4";
197 		#address-cells = <1>;
198 		#size-cells = <0>;
203 	pinctrl-0 = <&du_pins>;
204 	pinctrl-names = "default";
209 	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
214 				remote-endpoint = <&adv7123_in>;
221 	clock-frequency = <20000000>;
225 	pinctrl-0 = <&scif_clk_pins>;
226 	pinctrl-names = "default";
243 	ether_pins: ether {
276 		power-source = <3300>;
282 		power-source = <1800>;
288 		power-source = <3300>;
294 		power-source = <1800>;
309 &ether {
310 	pinctrl-0 = <&ether_pins &phy1_pins>;
311 	pinctrl-names = "default";
313 	phy-handle = <&phy1>;
314 	renesas,ether-link-active-low;
317 	phy1: ethernet-phy@1 {
319 		interrupt-parent = <&irqc0>;
321 		micrel,led-mode = <1>;
326 	pinctrl-0 = <&mmcif0_pins>;
327 	pinctrl-names = "default";
329 	vmmc-supply = <&d3_3v>;
330 	vqmmc-supply = <&d3_3v>;
331 	bus-width = <8>;
332 	non-removable;
337 	timeout-sec = <60>;
342 	pinctrl-0 = <&sdhi0_pins>;
343 	pinctrl-1 = <&sdhi0_pins_uhs>;
344 	pinctrl-names = "default", "state_uhs";
346 	vmmc-supply = <&vcc_sdhi0>;
347 	vqmmc-supply = <&vccq_sdhi0>;
348 	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
349 	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
350 	sd-uhs-sdr50;
351 	sd-uhs-sdr104;
356 	pinctrl-0 = <&sdhi1_pins>;
357 	pinctrl-1 = <&sdhi1_pins_uhs>;
358 	pinctrl-names = "default", "state_uhs";
360 	vmmc-supply = <&vcc_sdhi1>;
361 	vqmmc-supply = <&vccq_sdhi1>;
362 	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
363 	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
364 	sd-uhs-sdr50;
369 	pinctrl-0 = <&i2c1_pins>;
370 	pinctrl-names = "i2c-hdmi";
372 	clock-frequency = <400000>;
376 	pinctrl-0 = <&i2c4_pins>;
377 	pinctrl-names = "i2c-exio4";
382 	pinctrl-0 = <&vin0_pins>;
383 	pinctrl-names = "default";
387 			remote-endpoint = <&adv7180>;
388 			bus-width = <8>;
394 	pinctrl-0 = <&scif2_pins>;
395 	pinctrl-names = "default";
401 	clock-frequency = <14745600>;
405 	pinctrl-0 = <&qspi_pins>;
406 	pinctrl-names = "default";
411 		compatible = "spansion,s25fl512s", "jedec,spi-nor";
413 		spi-max-frequency = <30000000>;
414 		spi-tx-bus-width = <4>;
415 		spi-rx-bus-width = <4>;
416 		spi-cpol;
417 		spi-cpha;
418 		m25p,fast-read;
421 			compatible = "fixed-partitions";
422 			#address-cells = <1>;
423 			#size-cells = <1>;
428 				read-only;
433 				read-only;