Lines Matching +full:da9063 +full:- +full:watchdog
1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
23 stdout-path = "serial0:115200n8";
32 compatible = "gpio-leds";
47 fixedregulator3v3: regulator-3v3 {
48 compatible = "regulator-fixed";
49 regulator-name = "fixed-3.3V";
50 regulator-min-microvolt = <3300000>;
51 regulator-max-microvolt = <3300000>;
52 regulator-boot-on;
53 regulator-always-on;
56 vcc_sdhi0: regulator-vcc-sdhi0 {
57 compatible = "regulator-fixed";
59 regulator-name = "SDHI0 Vcc";
60 regulator-min-microvolt = <3300000>;
61 regulator-max-microvolt = <3300000>;
64 enable-active-high;
67 hdmi-out {
68 compatible = "hdmi-connector";
73 remote-endpoint = <&adv7511_out>;
78 osc1_clk: osc1-clock {
79 compatible = "fixed-clock";
80 #clock-cells = <0>;
81 clock-frequency = <148500000>;
84 osc4_clk: osc4-clock {
85 compatible = "fixed-clock";
86 #clock-cells = <0>;
87 clock-frequency = <12000000>;
92 pinctrl-0 = <&du_pins>;
93 pinctrl-names = "default";
99 clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", "dclkin.0";
104 remote-endpoint = <&adv7511_in>;
119 clock-frequency = <20000000>;
124 pinctrl-0 = <&scif_clk_pins>;
125 pinctrl-names = "default";
155 power-source = <3300>;
180 pinctrl-0 = <ðer_pins &phy1_pins>;
181 pinctrl-names = "default";
183 phy-handle = <&phy1>;
184 renesas,ether-link-active-low;
187 phy1: ethernet-phy@1 {
189 interrupt-parent = <&irqc0>;
191 micrel,led-mode = <1>;
200 pinctrl-0 = <&qspi_pins>;
201 pinctrl-names = "default";
206 compatible = "spansion,s25fl512s", "jedec,spi-nor";
208 spi-max-frequency = <30000000>;
209 spi-tx-bus-width = <4>;
210 spi-rx-bus-width = <4>;
211 spi-cpha;
212 spi-cpol;
213 m25p,fast-read;
216 compatible = "fixed-partitions";
217 #address-cells = <1>;
218 #size-cells = <1>;
223 read-only;
228 read-only;
231 label = "uboot-env";
233 read-only;
244 pinctrl-0 = <&scifa0_pins>;
245 pinctrl-names = "default";
251 clock-frequency = <14745600>;
255 pinctrl-0 = <&sdhi0_pins>;
256 pinctrl-names = "default";
258 vmmc-supply = <&vcc_sdhi0>;
259 cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
264 cpu0-supply = <&vdd_dvfs>;
269 pinctrl-0 = <&iic2_pins>;
270 pinctrl-names = "default";
272 clock-frequency = <100000>;
277 interrupt-parent = <&gpio1>;
280 clock-names = "cec";
282 adi,input-depth = <8>;
283 adi,input-colorspace = "rgb";
284 adi,input-clock = "1x";
285 adi,input-style = <1>;
286 adi,input-justification = "evenly";
289 #address-cells = <1>;
290 #size-cells = <0>;
295 remote-endpoint = <&du_out_rgb>;
302 remote-endpoint = <&hdmi_con_out>;
310 pinctrl-names = "default";
311 pinctrl-0 = <&iic3_pins>;
315 compatible = "dlg,da9063";
317 interrupt-parent = <&irqc0>;
319 interrupt-controller;
322 compatible = "dlg,da9063-rtc";
326 compatible = "dlg,da9063-watchdog";
333 interrupt-parent = <&irqc0>;
336 regulator-min-microvolt = <1000000>;
337 regulator-max-microvolt = <1000000>;
338 regulator-boot-on;
339 regulator-always-on;
345 interrupt-parent = <&irqc0>;
348 regulator-min-microvolt = <1000000>;
349 regulator-max-microvolt = <1000000>;
350 regulator-boot-on;
351 regulator-always-on;
357 pinctrl-0 = <&usb0_pins>;
358 pinctrl-names = "default";