arm/dts/omap3-beagle.dts

2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
8 /dts-v1/;
14 	compatible = "ti,omap3-beagle", "ti,omap3";
18 			cpu0-supply = <&vcc>;
33 		compatible = "gpio-leds";
41 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
42 			linux,default-trigger = "heartbeat";
47 			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
48 			linux,default-trigger = "mmc0";
54 		compatible = "regulator-fixed";
55 		regulator-name = "hsusb2_vbus";
56 		regulator-min-microvolt = <3300000>;
57 		regulator-max-microvolt = <3300000>;
59 		startup-delay-us = <70000>;
64 		compatible = "usb-nop-xceiv";
65 		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;	/* gpio_147 */
66 		vcc-supply = <&hsusb2_power>;
67 		#phy-cells = <0>;
71 		compatible = "ti,omap-twl4030";
78 		compatible = "gpio-keys";
84 			wakeup-source;
91 		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;	/* gpio_170 */
93 		pinctrl-names = "default";
94 		pinctrl-0 = <&tfp410_pins>;
97 			#address-cells = <1>;
98 			#size-cells = <0>;
104 					remote-endpoint = <&dpi_out>;
112 					remote-endpoint = <&dvi_connector_in>;
119 		compatible = "dvi-connector";
124 		ddc-i2c-bus = <&i2c3>;
128 				remote-endpoint = <&tfp410_out>;
134 		compatible = "svideo-connector";
139 				remote-endpoint = <&venc_out>;
145 		compatible = "arm,coresight-etb10", "arm,primecell";
149 		clock-names = "apb_pclk";
152 				slave-mode;
153 				remote-endpoint = <&etm_out>;
159 		compatible = "arm,coresight-etm3x", "arm,primecell";
163 		clock-names = "apb_pclk";
166 				remote-endpoint = <&etb_in>;
174 		pinctrl-single,pins = <
181 	pinctrl-names = "default";
182 	pinctrl-0 = <
187 		pinctrl-single,pins = <
198 		pinctrl-single,pins = <
205 		pinctrl-single,pins = <
211 		pinctrl-single,pins = <
245 	pinctrl-names = "default";
246 	pinctrl-0 = <
251 		pinctrl-single,pins = <
263 	clock-frequency = <2600000>;
268 		interrupt-parent = <&intc>;
271 			compatible = "ti,twl4030-audio";
282 	clock-frequency = <100000>;
286 	vmmc-supply = <&vmmc1>;
287 	vqmmc-supply = <&vsim>;
288 	bus-width = <8>;
300 	port2-mode = "ehci-phy";
308 	ti,use-leds;
320 	pinctrl-names = "default";
321 	pinctrl-0 = <&uart3_pins>;
322 	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
326 	pinctrl-names = "default";
327 	pinctrl-0 = <&gpio1_pins>;
331 	interface-type = <0>;
332 	usb-phy = <&usb2_phy>;
334 	phy-names = "usb2-phy";
340 	regulator-name = "vdd_ehci";
341 	regulator-min-microvolt = <1800000>;
342 	regulator-max-microvolt = <1800000>;
343 	regulator-always-on;
352 	regulator-always-on;
358 	pinctrl-names = "default";
359 	pinctrl-0 = <&dss_dpi_pins>;
363 			remote-endpoint = <&tfp410_in>;
364 			data-lines = <24>;
372 	vdda-supply = <&vdac>;
376 			remote-endpoint = <&tv_connector_in>;
388 		compatible = "ti,omap2-nand";
390 		interrupt-parent = <&gpmc>;
393 		ti,nand-ecc-opt = "ham1";
394 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
395 		nand-bus-width = <16>;
396 		#address-cells = <1>;
397 		#size-cells = <1>;
399 		gpmc,device-width = <2>;
400 		gpmc,cs-on-ns = <0>;
401 		gpmc,cs-rd-off-ns = <36>;
402 		gpmc,cs-wr-off-ns = <36>;
403 		gpmc,adv-on-ns = <6>;
404 		gpmc,adv-rd-off-ns = <24>;
405 		gpmc,adv-wr-off-ns = <36>;
406 		gpmc,oe-on-ns = <6>;
407 		gpmc,oe-off-ns = <48>;
408 		gpmc,we-on-ns = <6>;
409 		gpmc,we-off-ns = <30>;
410 		gpmc,rd-cycle-ns = <72>;
411 		gpmc,wr-cycle-ns = <72>;
412 		gpmc,access-ns = <54>;
413 		gpmc,wr-access-ns = <30>;
416 			label = "X-Loader";
420 			label = "U-Boot";
424 			label = "U-Boot Env";