arm/dts/meson-gxl-s905x-khadas-vim.dts

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/input/input.h>
10 #include "meson-gxl-s905x-p212.dtsi"
13 	compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl";
16 	adc-keys {
17 		compatible = "adc-keys";
18 		io-channels = <&saradc 0>;
19 		io-channel-names = "buttons";
20 		keyup-threshold-microvolt = <1710000>;
22 		button-function {
25 			press-threshold-microvolt = <10000>;
34 	gpio-keys-polled {
35 		compatible = "gpio-keys-polled";
36 		#address-cells = <1>;
37 		#size-cells = <0>;
38 		poll-interval = <100>;
48 		compatible = "pwm-leds";
53 			max-brightness = <255>;
54 			linux,default-trigger = "default-on";
58 	hdmi-connector {
59 		compatible = "hdmi-connector";
64 				remote-endpoint = <&hdmi_tx_tmds_out>;
72 	pinctrl-0 = <&ao_cec_pins>;
73 	pinctrl-names = "default";
74 	hdmi-phandle = <&hdmi_tx>;
79 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
80 	pinctrl-names = "default";
81 	hdmi-supply = <&hdmi_5v>;
86 		remote-endpoint = <&hdmi_connector_in>;
92 	pinctrl-0 = <&i2c_a_pins>;
93 	pinctrl-names = "default";
98 	pinctrl-0 = <&i2c_b_pins>;
99 	pinctrl-names = "default";
106 		#clock-cells = <0>;
107 		clock-frequency = <32768>;
108 		clock-output-names = "xin32k";
113 	linux,rc-map-name = "rc-geekbox";
117 	gpio-line-names = "UART TX",
132 	gpio-line-names = /* Bank GPIOZ */
146 			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
147 			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
148 			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
149 			  "", "BOOT_MODE", "", "", "eMMC Data Strobe",
174 	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
175 	pinctrl-names = "default";
177 	clock-names = "clkin0", "clkin1" ;
181 	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
187 		compatible = "brcm,bcm4329-fmac";
191 /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
196 /* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
199 	pinctrl-0 = <&uart_ao_b_pins>;
200 	pinctrl-names = "default";