arm/dts/meson-axg-s400.dts

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "meson-axg.dtsi"
9 #include <dt-bindings/input/input.h>
12 	compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
16 		compatible = "adc-keys";
17 		io-channels = <&saradc 0>;
18 		io-channel-names = "buttons";
19 		keyup-threshold-microvolt = <1800000>;
21 		button-next {
24 			press-threshold-microvolt = <1116000>; /* 62% */
27 		button-prev {
30 			press-threshold-microvolt = <900000>; /* 50% */
33 		button-wifi {
36 			press-threshold-microvolt = <684000>; /* 38% */
39 		button-up {
42 			press-threshold-microvolt = <468000>; /* 26% */
45 		button-down {
48 			press-threshold-microvolt = <252000>; /* 14% */
51 		button-voice {
54 			press-threshold-microvolt = <0>; /* 0% */
63 	linein: audio-codec@0 {
64 		#sound-dai-cells = <0>;
66 		VDDA-supply = <&vcc_3v3>;
67 		VDDP-supply = <&vcc_3v3>;
68 		VDDD-supply = <&vcc_3v3>;
70 		sound-name-prefix = "Linein";
73 	lineout: audio-codec@1 {
74 		#sound-dai-cells = <0>;
76 		VDD-supply = <&vcc_3v3>;
77 		PVDD-supply = <&vcc_5v>;
79 		sound-name-prefix = "Lineout";
82 	spdif_dit: audio-codec@2 {
83 		#sound-dai-cells = <0>;
84 		compatible = "linux,spdif-dit";
86 		sound-name-prefix = "DIT";
89 	dmics: audio-codec@3 {
90 		#sound-dai-cells = <0>;
91 		compatible = "dmic-codec";
92 		num-channels = <7>;
93 		wakeup-delay-ms = <50>;
95 		sound-name-prefix = "MIC";
98 	emmc_pwrseq: emmc-pwrseq {
99 		compatible = "mmc-pwrseq-emmc";
100 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
104 		stdout-path = "serial0:115200n8";
112 	main_12v: regulator-main_12v {
113 		compatible = "regulator-fixed";
114 		regulator-name = "12V";
115 		regulator-min-microvolt = <12000000>;
116 		regulator-max-microvolt = <12000000>;
117 		regulator-always-on;
120 	vcc_3v3: regulator-vcc_3v3 {
121 		compatible = "regulator-fixed";
122 		regulator-name = "VCC_3V3";
123 		regulator-min-microvolt = <3300000>;
124 		regulator-max-microvolt = <3300000>;
125 		vin-supply = <&vddao_3v3>;
126 		regulator-always-on;
129 	vcc_5v: regulator-vcc_5v {
130 		compatible = "regulator-fixed";
131 		regulator-name = "VCC5V";
132 		regulator-min-microvolt = <5000000>;
133 		regulator-max-microvolt = <5000000>;
134 		vin-supply = <&main_12v>;
137 		enable-active-high;
140 	vddao_3v3: regulator-vddao_3v3 {
141 		compatible = "regulator-fixed";
142 		regulator-name = "VDDAO_3V3";
143 		regulator-min-microvolt = <3300000>;
144 		regulator-max-microvolt = <3300000>;
145 		vin-supply = <&main_12v>;
146 		regulator-always-on;
149 	vddio_ao18: regulator-vddio_ao18 {
150 		compatible = "regulator-fixed";
151 		regulator-name = "VDDIO_AO18";
152 		regulator-min-microvolt = <1800000>;
153 		regulator-max-microvolt = <1800000>;
154 		vin-supply = <&vddao_3v3>;
155 		regulator-always-on;
158 	vddio_boot: regulator-vddio_boot {
159 		compatible = "regulator-fixed";
160 		regulator-name = "VDDIO_BOOT";
161 		regulator-min-microvolt = <1800000>;
162 		regulator-max-microvolt = <1800000>;
163 		vin-supply = <&vddao_3v3>;
164 		regulator-always-on;
167 	usb_pwr: regulator-usb_pwr {
168 		compatible = "regulator-fixed";
169 		regulator-name = "USB_PWR";
170 		regulator-min-microvolt = <5000000>;
171 		regulator-max-microvolt = <5000000>;
172 		vin-supply = <&vcc_5v>;
175 		enable-active-high;
178 	sdio_pwrseq: sdio-pwrseq {
179 		compatible = "mmc-pwrseq-simple";
180 		reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
182 		clock-names = "ext_clock";
185 	speaker-leds {
186 		compatible = "gpio-leds";
220 		compatible = "amlogic,axg-sound-card";
221 		model = "AXG-S400";
222 		audio-aux-devs = <&tdmin_a>, <&tdmin_b>,  <&tdmin_c>,
224 		audio-widgets = "Line", "Lineout",
228 		audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
266 		assigned-clocks = <&clkc CLKID_HIFI_PLL>,
269 		assigned-clock-parents = <0>, <0>, <0>;
270 		assigned-clock-rates = <589824000>,
275 		dai-link@0 {
276 			sound-dai = <&frddr_a>;
279 		dai-link@1 {
280 			sound-dai = <&frddr_b>;
283 		dai-link@2 {
284 			sound-dai = <&frddr_c>;
287 		dai-link@3 {
288 			sound-dai = <&toddr_a>;
291 		dai-link@4 {
292 			sound-dai = <&toddr_b>;
295 		dai-link@5 {
296 			sound-dai = <&toddr_c>;
299 		dai-link@6 {
300 			sound-dai = <&tdmif_c>;
301 			dai-format = "i2s";
302 			dai-tdm-slot-tx-mask-2 = <1 1>;
303 			dai-tdm-slot-rx-mask-1 = <1 1>;
304 			mclk-fs = <256>;
307 				sound-dai = <&lineout>;
311 				sound-dai = <&speaker_amp1>;
315 				sound-dai = <&linein>;
320 		dai-link@7 {
321 			sound-dai = <&spdifout>;
324 				sound-dai = <&spdif_dit>;
328 		dai-link@8 {
329 			sound-dai = <&pdm>;
332 				sound-dai = <&dmics>;
338 		compatible = "pwm-clock";
339 		#clock-cells = <0>;
340 		clock-frequency = <32768>;
347 	pinctrl-0 = <&eth_rgmii_y_pins>;
348 	pinctrl-names = "default";
349 	phy-handle = <&eth_phy0>;
350 	phy-mode = "rgmii";
353 		compatible = "snps,dwmac-mdio";
354 		#address-cells = <1>;
355 		#size-cells = <0>;
357 		eth_phy0: ethernet-phy@0 {
360 			eee-broken-1000t;
379 	pinctrl-0 = <&remote_input_ao_pins>;
380 	pinctrl-names = "default";
385 	pinctrl-0 = <&i2c1_z_pins>;
386 	pinctrl-names = "default";
388 	speaker_amp1: audio-codec@1b {
391 		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
392 		#sound-dai-cells = <0>;
393 		AVDD-supply = <&vcc_3v3>;
394 		DVDD-supply = <&vcc_3v3>;
395 		PVDD_A-supply = <&main_12v>;
396 		PVDD_B-supply = <&main_12v>;
397 		PVDD_C-supply = <&main_12v>;
398 		PVDD_D-supply = <&main_12v>;
399 		sound-name-prefix = "SPK1";
405 	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
406 	pinctrl-names = "default";
408 	gpio_speaker: gpio-controller@1f {
411 		gpio-controller;
412 		#gpio-cells = <2>;
413 		vcc-supply = <&vddao_3v3>;
418 	pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>,
420 	pinctrl-names = "default";
426 	pinctrl-0 = <&pwm_a_x20_pins>;
427 	pinctrl-names = "default";
432 	vref-supply = <&vddio_ao18>;
438 	#address-cells = <1>;
439 	#size-cells = <0>;
441 	pinctrl-0 = <&sdio_pins>;
442 	pinctrl-1 = <&sdio_clk_gate_pins>;
443 	pinctrl-names = "default", "clk-gate";
445 	bus-width = <4>;
446 	cap-sd-highspeed;
447 	max-frequency = <100000000>;
448 	non-removable;
449 	disable-wp;
451 	mmc-pwrseq = <&sdio_pwrseq>;
453 	vmmc-supply = <&vddao_3v3>;
454 	vqmmc-supply = <&vddio_boot>;
458 		compatible = "brcm,bcm4329-fmac";
465 	pinctrl-0 = <&emmc_pins>;
466 	pinctrl-1 = <&emmc_clk_gate_pins>;
467 	pinctrl-names = "default", "clk-gate";
469 	bus-width = <8>;
470 	cap-sd-highspeed;
471 	cap-mmc-highspeed;
472 	max-frequency = <180000000>;
473 	non-removable;
474 	disable-wp;
475 	mmc-ddr-1_8v;
476 	mmc-hs200-1_8v;
478 	mmc-pwrseq = <&emmc_pwrseq>;
480 	vmmc-supply = <&vcc_3v3>;
481 	vqmmc-supply = <&vddio_boot>;
485 	pinctrl-0 = <&spdif_out_a20_pins>;
486 	pinctrl-names = "default";
491 	pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>,
493 	pinctrl-names = "default";
498 	pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>,
500 	pinctrl-names = "default";
505 	pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>,
508 	pinctrl-names = "default";
546 	pinctrl-0 = <&uart_a_pins>;
547 	pinctrl-names = "default";
552 	pinctrl-0 = <&uart_ao_a_pins>;
553 	pinctrl-names = "default";