arm/dts/keystone-k2l-evm.dts

10 /dts-v1/;
13 #include "keystone-k2l.dtsi"
16 	compatible =  "ti,k2l-evm","ti,keystone";
22 				#clock-cells = <0>;
23 				compatible = "fixed-clock";
24 				clock-frequency = <122880000>;
25 				clock-output-names = "refclk-sys";
35 &usb {
42 		reg = <0x50>;
48 		#address-cells = <2>;
49 		#size-cells = <1>;
50 		clock-ranges;
53 		ti,cs-chipselect = <0>;
55 		ti,cs-min-turnaround-ns = <12>;
56 		ti,cs-read-hold-ns = <6>;
57 		ti,cs-read-strobe-ns = <23>;
58 		ti,cs-read-setup-ns = <9>;
59 		ti,cs-write-hold-ns = <8>;
60 		ti,cs-write-strobe-ns = <23>;
61 		ti,cs-write-setup-ns = <8>;
64 			compatible = "ti,keystone-nand","ti,davinci-nand";
65 			#address-cells = <1>;
66 			#size-cells = <1>;
67 			reg = <0 0 0x4000000
70 			ti,davinci-chipselect = <0>;
71 			ti,davinci-mask-ale = <0x2000>;
72 			ti,davinci-mask-cle = <0x4000>;
73 			ti,davinci-mask-chipsel = <0>;
74 			nand-ecc-mode = "hw";
75 			ti,davinci-ecc-bits = <4>;
76 			nand-on-flash-bbt;
79 				label = "u-boot";
80 				reg = <0x0 0x100000>;
81 				read-only;
86 				reg = <0x100000 0x80000>;
87 				read-only;
92 				reg = <0x180000 0x7FE80000>;
101 		#address-cells = <1>;
102 		#size-cells = <1>;
103 		compatible = "Micron,n25q128a11", "spi-flash";
104 		spi-max-frequency = <54000000>;
105 		m25p,fast-read;
106 		reg = <0>;
109 			label = "u-boot-spl";
110 			reg = <0x0 0x80000>;
111 			read-only;
115 			label = "misc";
116 			reg = <0x80000 0xf80000>;
123 	ethphy0: ethernet-phy@0 {
124 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
125 		reg = <0>;
128 	ethphy1: ethernet-phy@1 {
129 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
130 		reg = <1>;