arm/dts/keystone-k2hk-evm.dts

2  * Copyright 2013-2014 Texas Instruments, Inc.
4  * Keystone 2 Kepler/Hawking EVM device tree
10 /dts-v1/;
12 #include "keystone.dtsi"
13 #include "keystone-k2hk.dtsi"
16 	compatible =  "ti,k2hk-evm","ti,keystone";
17 	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
22 				#clock-cells = <0>;
23 				compatible = "fixed-clock";
24 				clock-frequency = <122880000>;
25 				clock-output-names = "refclk-sys";
29 				#clock-cells = <0>;
30 				compatible = "fixed-clock";
31 				clock-frequency = <122880000>;
32 				clock-output-names = "refclk-pass";
36 				#clock-cells = <0>;
37 				compatible = "fixed-clock";
38 				clock-frequency = <125000000>;
39 				clock-output-names = "refclk-arm";
43 				#clock-cells = <0>;
44 				compatible = "fixed-clock";
45 				clock-frequency = <100000000>;
46 				clock-output-names = "refclk-ddr3a";
50 				#clock-cells = <0>;
51 				compatible = "fixed-clock";
52 				clock-frequency = <100000000>;
53 				clock-output-names = "refclk-ddr3b";
59 		compatible = "gpio-leds";
61 			label = "keystone:green:debug1";
66 			label = "keystone:red:debug1";
71 			label = "keystone:blue:debug2";
76 			label = "keystone:blue:debug3";
92 		#address-cells = <2>;
93 		#size-cells = <1>;
94 		clock-ranges;
97 		ti,cs-chipselect = <0>;
99 		ti,cs-min-turnaround-ns = <12>;
100 		ti,cs-read-hold-ns = <6>;
101 		ti,cs-read-strobe-ns = <23>;
102 		ti,cs-read-setup-ns = <9>;
103 		ti,cs-write-hold-ns = <8>;
104 		ti,cs-write-strobe-ns = <23>;
105 		ti,cs-write-setup-ns = <8>;
108 			compatible = "ti,keystone-nand","ti,davinci-nand";
109 			#address-cells = <1>;
110 			#size-cells = <1>;
114 			ti,davinci-chipselect = <0>;
115 			ti,davinci-mask-ale = <0x2000>;
116 			ti,davinci-mask-cle = <0x4000>;
117 			ti,davinci-mask-chipsel = <0>;
118 			nand-ecc-mode = "hw";
119 			ti,davinci-ecc-bits = <4>;
120 			nand-on-flash-bbt;
123 				label = "u-boot";
125 				read-only;
131 				read-only;
152 		#address-cells = <1>;
153 		#size-cells = <1>;
154 		compatible = "Micron,n25q128a11", "spi-flash";
155 		spi-max-frequency = <54000000>;
156 		m25p,fast-read;
160 			label = "u-boot-spl";
162 			read-only;
174 	ethphy0: ethernet-phy@0 {
175 		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
179 	ethphy1: ethernet-phy@1 {
180 		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";