arm/dts/keystone-k2e-evm.dts

2  * Copyright 2013-2014 Texas Instruments, Inc.
10 /dts-v1/;
13 #include "keystone-k2e.dtsi"
16 	compatible =  "ti,k2e-evm","ti,keystone";
23 				#clock-cells = <0>;
24 				compatible = "fixed-clock";
25 				clock-frequency = <100000000>;
26 				clock-output-names = "refclk-sys";
30 				#clock-cells = <0>;
31 				compatible = "fixed-clock";
32 				clock-frequency = <100000000>;
33 				clock-output-names = "refclk-pass";
37 				#clock-cells = <0>;
38 				compatible = "fixed-clock";
39 				clock-frequency = <100000000>;
40 				clock-output-names = "refclk-ddr3a";
71 		#address-cells = <2>;
72 		#size-cells = <1>;
73 		clock-ranges;
76 		ti,cs-chipselect = <0>;
78 		ti,cs-min-turnaround-ns = <12>;
79 		ti,cs-read-hold-ns = <6>;
80 		ti,cs-read-strobe-ns = <23>;
81 		ti,cs-read-setup-ns = <9>;
82 		ti,cs-write-hold-ns = <8>;
83 		ti,cs-write-strobe-ns = <23>;
84 		ti,cs-write-setup-ns = <8>;
87 			compatible = "ti,keystone-nand","ti,davinci-nand";
88 			#address-cells = <1>;
89 			#size-cells = <1>;
93 			ti,davinci-chipselect = <0>;
94 			ti,davinci-mask-ale = <0x2000>;
95 			ti,davinci-mask-cle = <0x4000>;
96 			ti,davinci-mask-chipsel = <0>;
97 			nand-ecc-mode = "hw";
98 			ti,davinci-ecc-bits = <4>;
99 			nand-on-flash-bbt;
102 				label = "u-boot";
104 				read-only;
110 				read-only;
124 		#address-cells = <1>;
125 		#size-cells = <1>;
126 		compatible = "Micron,n25q128a11", "spi-flash";
127 		spi-max-frequency = <54000000>;
128 		m25p,fast-read;
132 			label = "u-boot-spl";
134 			read-only;
146 	ethphy0: ethernet-phy@0 {
147 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
151 	ethphy1: ethernet-phy@1 {
152 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";