arm/dts/imx7d-sdb.dts

1 // SPDX-License-Identifier: GPL-2.0+
6 /dts-v1/;
12 	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
22 	soft_spi: soft-spi {
23 		compatible = "spi-gpio";
24 		pinctrl-names = "default";
25 		pinctrl-0 = <&pinctrl_spi1>;
27 		gpio-sck = <&gpio1 13 0>;
28 		gpio-mosi = <&gpio1 9 0>;
29 		cs-gpios = <&gpio1 12 0>;
30 		num-chipselects = <1>;
31 		#address-cells = <1>;
32 		#size-cells = <0>;
36 			gpio-controller;
37 			#gpio-cells = <2>;
39 			registers-number = <1>;
40 			registers-default = /bits/ 8 <0x74>; /* Enable PERI_3V3, SENSOR_RST_B and HDMI_RST*/
41 			spi-max-frequency = <100000>;
46 		compatible = "simple-bus";
47 		#address-cells = <1>;
48 		#size-cells = <0>;
50 		reg_usb_otg1_vbus: regulator@0 {
51 			compatible = "regulator-fixed";
53 			regulator-name = "usb_otg1_vbus";
54 			regulator-min-microvolt = <5000000>;
55 			regulator-max-microvolt = <5000000>;
57 			enable-active-high;
60 		reg_usb_otg2_vbus: regulator@1 {
61 			compatible = "regulator-fixed";
63 			regulator-name = "usb_otg2_vbus";
64 			regulator-min-microvolt = <5000000>;
65 			regulator-max-microvolt = <5000000>;
67 			enable-active-high;
70 		reg_sd1_vmmc: regulator@3 {
71 			compatible = "regulator-fixed";
72 			regulator-name = "VDD_SD1";
73 			regulator-min-microvolt = <3300000>;
74 			regulator-max-microvolt = <3300000>;
76 			startup-delay-us = <200000>;
77 			enable-active-high;
83 	imx7d-sdb {
248 	clock-frequency = <100000>;
249 	pinctrl-names = "default";
250 	pinctrl-0 = <&pinctrl_i2c1>;
259 				regulator-min-microvolt = <700000>;
260 				regulator-max-microvolt = <3300000>;
261 				regulator-boot-on;
262 				regulator-always-on;
263 				regulator-ramp-delay = <6250>;
268 				regulator-min-microvolt = <700000>;
269 				regulator-max-microvolt = <1475000>;
270 				regulator-boot-on;
271 				regulator-always-on;
272 				regulator-ramp-delay = <6250>;
276 				regulator-min-microvolt = <1500000>;
277 				regulator-max-microvolt = <1850000>;
278 				regulator-boot-on;
279 				regulator-always-on;
283 				regulator-min-microvolt = <900000>;
284 				regulator-max-microvolt = <1650000>;
285 				regulator-boot-on;
286 				regulator-always-on;
290 				regulator-min-microvolt = <5000000>;
291 				regulator-max-microvolt = <5150000>;
295 				regulator-min-microvolt = <1000000>;
296 				regulator-max-microvolt = <3000000>;
297 				regulator-boot-on;
298 				regulator-always-on;
302 				regulator-boot-on;
303 				regulator-always-on;
307 				regulator-min-microvolt = <1800000>;
308 				regulator-max-microvolt = <3300000>;
309 				regulator-always-on;
313 				regulator-min-microvolt = <800000>;
314 				regulator-max-microvolt = <1550000>;
315 				regulator-always-on;
319 				regulator-min-microvolt = <2850000>;
320 				regulator-max-microvolt = <3300000>;
321 				regulator-always-on;
325 				regulator-min-microvolt = <2850000>;
326 				regulator-max-microvolt = <3300000>;
327 				regulator-always-on;
331 				regulator-min-microvolt = <1800000>;
332 				regulator-max-microvolt = <3300000>;
333 				regulator-always-on;
337 				regulator-min-microvolt = <1800000>;
338 				regulator-max-microvolt = <3300000>;
339 				regulator-always-on;
346 	clock-frequency = <100000>;
347 	pinctrl-names = "default";
348 	pinctrl-0 = <&pinctrl_i2c2>;
353 	clock-frequency = <100000>;
354 	pinctrl-names = "default";
355 	pinctrl-0 = <&pinctrl_i2c3>;
360 	clock-frequency = <100000>;
361 	pinctrl-names = "default";
362 	pinctrl-0 = <&pinctrl_i2c4>;
367 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
368 	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
369 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
370 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
371 	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
372 	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
373 	vmmc-supply = <&reg_sd1_vmmc>;
374 	fsl,tuning-start-tap = <20>;
375 	fsl,tuning-step= <2>;
380 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
381 	pinctrl-0 = <&pinctrl_usdhc2>;
382 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
383 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
384 	non-removable;
385 	fsl,tuning-start-tap = <20>;
386 	fsl,tuning-step= <2>;
391 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
392 	pinctrl-0 = <&pinctrl_usdhc3>;
393 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
394 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
395 	bus-width = <8>;
396 	non-removable;
397 	fsl,tuning-start-tap = <20>;
398 	fsl,tuning-step= <2>;