arm/dts/imx6sx-sdb.dtsi

9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
17 	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
20 		stdout-path = &uart1;
28 		compatible = "pwm-backlight";
30 		brightness-levels = <0 4 8 16 32 64 128 255>;
31 		default-brightness-level = <6>;
34 	gpio-keys {
35 		compatible = "gpio-keys";
36 		pinctrl-names = "default";
37 		pinctrl-0 = <&pinctrl_gpio_keys>;
39 		volume-up {
45 		volume-down {
53 		compatible = "simple-bus";
54 		#address-cells = <1>;
55 		#size-cells = <0>;
58 			compatible = "regulator-fixed";
60 			pinctrl-names = "default";
61 			pinctrl-0 = <&pinctrl_vcc_sd3>;
62 			regulator-name = "VCC_SD3";
63 			regulator-min-microvolt = <3000000>;
64 			regulator-max-microvolt = <3000000>;
66 			enable-active-high;
70 			compatible = "regulator-fixed";
72 			pinctrl-names = "default";
73 			pinctrl-0 = <&pinctrl_usb_otg1>;
74 			regulator-name = "usb_otg1_vbus";
75 			regulator-min-microvolt = <5000000>;
76 			regulator-max-microvolt = <5000000>;
78 			enable-active-high;
82 			compatible = "regulator-fixed";
84 			pinctrl-names = "default";
85 			pinctrl-0 = <&pinctrl_usb_otg2>;
86 			regulator-name = "usb_otg2_vbus";
87 			regulator-min-microvolt = <5000000>;
88 			regulator-max-microvolt = <5000000>;
90 			enable-active-high;
94 			compatible = "regulator-fixed";
96 			regulator-name = "PSU-5V0";
97 			regulator-min-microvolt = <5000000>;
98 			regulator-max-microvolt = <5000000>;
102 			compatible = "regulator-fixed";
104 			regulator-name = "lcd-3v3";
106 			enable-active-high;
110 			compatible = "regulator-fixed";
112 			pinctrl-names = "default";
113 			pinctrl-0 = <&pinctrl_peri_3v3>;
114 			regulator-name = "peri_3v3";
115 			regulator-min-microvolt = <3300000>;
116 			regulator-max-microvolt = <3300000>;
118 			enable-active-high;
119 			regulator-always-on;
123 			compatible = "regulator-fixed";
125 			pinctrl-names = "default";
126 			pinctrl-0 = <&pinctrl_enet_3v3>;
127 			regulator-name = "enet_3v3";
128 			regulator-min-microvolt = <3300000>;
129 			regulator-max-microvolt = <3300000>;
135 		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
136 		model = "wm8962-audio";
137 		ssi-controller = <&ssi2>;
138 		audio-codec = <&codec>;
139 		audio-routing =
146 		mux-int-port = <2>;
147 		mux-ext-port = <6>;
152 	pinctrl-names = "default";
153 	pinctrl-0 = <&pinctrl_audmux>;
158 	pinctrl-names = "default";
159 	pinctrl-0 = <&pinctrl_enet1>;
160 	phy-supply = <&reg_enet_3v3>;
161 	phy-mode = "rgmii";
162 	phy-handle = <&ethphy1>;
166 		#address-cells = <1>;
167 		#size-cells = <0>;
169 		ethphy1: ethernet-phy@1 {
173 		ethphy2: ethernet-phy@2 {
180 	pinctrl-names = "default";
181 	pinctrl-0 = <&pinctrl_enet2>;
182 	phy-mode = "rgmii";
183 	phy-handle = <&ethphy2>;
188 	clock-frequency = <100000>;
189 	pinctrl-names = "default";
190 	pinctrl-0 = <&pinctrl_i2c3>;
195 	clock-frequency = <100000>;
196 	pinctrl-names = "default";
197 	pinctrl-0 = <&pinctrl_i2c4>;
204 		DCVDD-supply = <&vgen4_reg>;
205 		DBVDD-supply = <&vgen4_reg>;
206 		AVDD-supply = <&vgen4_reg>;
207 		CPVDD-supply = <&vgen4_reg>;
208 		MICVDD-supply = <&vgen3_reg>;
209 		PLLVDD-supply = <&vgen4_reg>;
210 		SPKVDD1-supply = <&reg_psu_5v>;
211 		SPKVDD2-supply = <&reg_psu_5v>;
216 	pinctrl-names = "default";
217 	pinctrl-0 = <&pinctrl_lcd>;
218 	lcd-supply = <&reg_lcd_3v3>;
223 		bits-per-pixel = <16>;
224 		bus-width = <24>;
226 		display-timings {
227 			native-mode = <&timing0>;
229 				clock-frequency = <33500000>;
232 				hback-porch = <89>;
233 				hfront-porch = <164>;
234 				vback-porch = <23>;
235 				vfront-porch = <10>;
236 				hsync-len = <10>;
237 				vsync-len = <10>;
238 				hsync-active = <0>;
239 				vsync-active = <0>;
240 				de-active = <1>;
241 				pixelclk-active = <0>;
248 	pinctrl-names = "default";
249 	pinctrl-0 = <&pinctrl_pwm3>;
258 	pinctrl-names = "default";
259 	pinctrl-0 = <&pinctrl_sai1>;
268 	pinctrl-names = "default";
269 	pinctrl-0 = <&pinctrl_uart1>;
274 	pinctrl-names = "default";
275 	pinctrl-0 = <&pinctrl_uart5>;
276 	uart-has-rtscts;
281 	vbus-supply = <&reg_usb_otg1_vbus>;
282 	pinctrl-names = "default";
283 	pinctrl-0 = <&pinctrl_usb_otg1_id>;
288 	vbus-supply = <&reg_usb_otg2_vbus>;
294 	fsl,tx-d-cal = <106>;
298 	fsl,tx-d-cal = <106>;
302 	pinctrl-names = "default";
303 	pinctrl-0 = <&pinctrl_usdhc2>;
304 	non-removable;
305 	no-1-8-v;
306 	keep-power-in-suspend;
307 	wakeup-source;
312 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
313 	pinctrl-0 = <&pinctrl_usdhc3>;
314 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
315 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
316 	bus-width = <8>;
317 	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
318 	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
319 	keep-power-in-suspend;
320 	wakeup-source;
321 	vmmc-supply = <&vcc_sd3>;
326 	pinctrl-names = "default";
327 	pinctrl-0 = <&pinctrl_usdhc4>;
328 	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
329 	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
334 	pinctrl-names = "default";
335 	pinctrl-0 = <&pinctrl_wdog>;
336 	fsl,ext-reset-output;
340 	imx6x-sdb {
462 		pinctrl_pwm3: pwm3grp-1 {
563 		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
578 		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {