arm/dts/imx6sx-sabreauto.dts

9 /dts-v1/;
15 	compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
22 		compatible = "simple-bus";
23 		#address-cells = <1>;
24 		#size-cells = <0>;
27 			compatible = "regulator-fixed";
29 			pinctrl-names = "default";
30 			pinctrl-0 = <&pinctrl_vcc_sd3>;
31 			regulator-name = "VCC_SD3";
32 			regulator-min-microvolt = <3000000>;
33 			regulator-max-microvolt = <3000000>;
35 			enable-active-high;
41 	pinctrl-names = "default";
42 	pinctrl-0 = <&pinctrl_uart1>;
47 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
48 	pinctrl-0 = <&pinctrl_usdhc3>;
49 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
50 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
51 	bus-width = <8>;
52 	cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
53 	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
54 	keep-power-in-suspend;
55 	wakeup-source;
56 	vmmc-supply = <&vcc_sd3>;
61 	pinctrl-names = "default";
62 	pinctrl-0 = <&pinctrl_usdhc4>;
63 	bus-width = <8>;
64 	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
65 	no-1-8-v;
66 	keep-power-in-suspend;
67 	wakeup-source;
72 	clock-frequency = <100000>;
73 	pinctrl-names = "default";
74 	pinctrl-0 = <&pinctrl_i2c2_1>;
79         clock-frequency = <100000>;
80 	pinctrl-names = "default";
81 	pinctrl-0 = <&pinctrl_i2c3_2>;
87 		gpio-controller;
88 		#gpio-cells = <2>;
94 		gpio-controller;
95 		#gpio-cells = <2>;
100 	pinctrl-names = "default";
101 	pinctrl-0 = <&pinctrl_qspi1_1>;
106 		#address-cells = <1>;
107 		#size-cells = <1>;
109 		spi-max-frequency = <29000000>;
114 		#address-cells = <1>;
115 		#size-cells = <1>;
117 		spi-max-frequency = <29000000>;
123 	imx6x-sabreauto {
124 		pinctrl_i2c2_1: i2c2grp-1 {
131 		pinctrl_i2c3_2: i2c3grp-2 {
179 		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
194 		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {