Lines Matching +full:vl +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/input/input.h>
48 samsung,bl1-offset = <0x1400>;
49 samsung,bl2-offset = <0x3400>;
50 u-boot-memory = "/memory";
51 u-boot-offset = <0x3e00000 0x100000>;
56 #address-cells = <1>;
57 #size-cells = <1>;
58 pre-boot {
59 label = "bl1 pre-boot";
61 read-only;
63 type = "blob exynos-bl1";
70 read-only;
72 type = "blob exynos-bl2 boot,dtb";
73 payload = "/flash/ro-boot";
77 ro-boot {
78 label = "u-boot";
80 read-only;
88 stdout-path = "serial3:115200n8";
91 board-rev {
92 compatible = "google,board-revision";
93 google,board-rev-gpios = <&gpy4 0 0>, <&gpy4 1 0>,
98 clock-frequency = <100000>;
106 samsung,bus-width = <8>;
125 samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
130 samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
134 compatible = "google,spring-audio-max98088";
136 samsung,model = "Spring-I2S-MAX98088";
137 samsung,audio-codec = <&max98088>;
138 codec-enable-gpio = <&gpx1 7 0>;
141 sound-dai = <&i2s1 0>;
145 sound-dai = <&max98088 0>;
150 spi-max-frequency = <50000000>;
152 compatible = "spi-flash";
158 samsung,min-temp = <25>;
159 samsung,max-temp = <125>;
160 samsung,start-warning = <95>;
161 samsung,start-tripping = <105>;
162 samsung,hw-tripping = <110>;
163 samsung,efuse-min-value = <40>;
164 samsung,efuse-value = <55>;
165 samsung,efuse-max-value = <100>;
167 samsung,dc-value = <25>;
171 samsung,vl-freq = <60>;
172 samsung,vl-col = <1366>;
173 samsung,vl-row = <768>;
174 samsung,vl-width = <1366>;
175 samsung,vl-height = <768>;
177 samsung,vl-clkp;
178 samsung,vl-dp;
179 samsung,vl-hsp;
180 samsung,vl-vsp;
182 samsung,vl-bpix = <4>;
184 samsung,vl-hspw = <32>;
185 samsung,vl-hbpd = <80>;
186 samsung,vl-hfpd = <48>;
187 samsung,vl-vspw = <5>;
188 samsung,vl-vbpd = <14>;
189 samsung,vl-vfpd = <3>;
190 samsung,vl-cmd-allow-len = <0xf>;
193 samsung,interface-mode = <1>;
194 samsung,dp-enabled = <1>;
195 samsung,dual-lcd-enabled = <0>;
199 samsung,lt-status = <0>;
201 samsung,master-mode = <0>;
202 samsung,bist-mode = <0>;
203 samsung,bist-pattern = <0>;
204 samsung,h-sync-polarity = <0>;
205 samsung,v-sync-polarity = <0>;
207 samsung,color-space = <0>;
208 samsung,dynamic-range = <0>;
209 samsung,ycbcr-coeff = <0>;
210 samsung,color-depth = <1>;
214 compatible = "pwm-backlight";
216 brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
217 default-brightness-level = <1>;
218 enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
219 power-supply = <&fet1>;
224 power-supply = <&fet6>;
229 remote-endpoint = <&bridge_out>;
237 samsung,i2c-sda-delay = <100>;
238 samsung,i2c-max-bus-freq = <378000>;
240 s5m8767-pmic@66 {
241 compatible = "samsung,s5m8767-pmic";
243 interrupt-parent = <&gpx3>;
244 wakeup-source;
246 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
250 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
259 s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
264 s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
269 s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
275 compatible = "samsung,s5m8767-clk";
276 #clock-cells = <1>;
277 clock-output-names = "en32khz_ap",
284 regulator-name = "P1.0V_LDO_OUT4";
285 regulator-min-microvolt = <1000000>;
286 regulator-max-microvolt = <1000000>;
287 regulator-always-on;
292 regulator-name = "P1.8V_LDO_OUT5";
293 regulator-min-microvolt = <1800000>;
294 regulator-max-microvolt = <1800000>;
295 regulator-always-on;
300 regulator-name = "vdd_mydp";
301 regulator-min-microvolt = <1200000>;
302 regulator-max-microvolt = <1200000>;
303 regulator-always-on;
308 regulator-name = "P1.1V_LDO_OUT7";
309 regulator-min-microvolt = <1100000>;
310 regulator-max-microvolt = <1100000>;
311 regulator-always-on;
316 regulator-name = "P1.0V_LDO_OUT8";
317 regulator-min-microvolt = <1000000>;
318 regulator-max-microvolt = <1000000>;
319 regulator-always-on;
324 regulator-name = "P1.8V_LDO_OUT10";
325 regulator-min-microvolt = <1800000>;
326 regulator-max-microvolt = <1800000>;
327 regulator-always-on;
332 regulator-name = "P1.8V_LDO_OUT11";
333 regulator-min-microvolt = <1800000>;
334 regulator-max-microvolt = <1800000>;
335 regulator-always-on;
340 regulator-name = "P3.0V_LDO_OUT12";
341 regulator-min-microvolt = <3000000>;
342 regulator-max-microvolt = <3000000>;
343 regulator-always-on;
348 regulator-name = "P1.8V_LDO_OUT13";
349 regulator-min-microvolt = <1800000>;
350 regulator-max-microvolt = <1800000>;
351 regulator-always-on;
356 regulator-name = "P1.8V_LDO_OUT14";
357 regulator-min-microvolt = <1800000>;
358 regulator-max-microvolt = <1800000>;
359 regulator-always-on;
364 regulator-name = "P1.0V_LDO_OUT15";
365 regulator-min-microvolt = <1000000>;
366 regulator-max-microvolt = <1000000>;
367 regulator-always-on;
372 regulator-name = "P1.8V_LDO_OUT16";
373 regulator-min-microvolt = <1800000>;
374 regulator-max-microvolt = <1800000>;
375 regulator-always-on;
380 regulator-name = "P1.2V_LDO_OUT17";
381 regulator-min-microvolt = <1200000>;
382 regulator-max-microvolt = <1200000>;
383 regulator-always-on;
388 regulator-name = "vdd_bridge";
389 regulator-min-microvolt = <1200000>;
390 regulator-max-microvolt = <1200000>;
391 regulator-always-on;
396 regulator-name = "vdd_mif";
397 regulator-min-microvolt = <950000>;
398 regulator-max-microvolt = <1300000>;
399 regulator-always-on;
400 regulator-boot-on;
405 regulator-name = "vdd_arm";
406 regulator-min-microvolt = <850000>;
407 regulator-max-microvolt = <1350000>;
408 regulator-always-on;
409 regulator-boot-on;
414 regulator-name = "vdd_int";
415 regulator-min-microvolt = <900000>;
416 regulator-max-microvolt = <1200000>;
417 regulator-always-on;
418 regulator-boot-on;
423 regulator-name = "vdd_g3d";
424 regulator-min-microvolt = <850000>;
425 regulator-max-microvolt = <1300000>;
426 regulator-boot-on;
431 regulator-name = "P1.8V_BUCK_OUT5";
432 regulator-min-microvolt = <1800000>;
433 regulator-max-microvolt = <1800000>;
434 regulator-always-on;
435 regulator-boot-on;
440 regulator-name = "P1.2V_BUCK_OUT6";
441 regulator-min-microvolt = <2050000>;
442 regulator-max-microvolt = <2050000>;
443 regulator-always-on;
444 regulator-boot-on;
449 regulator-name = "vdd_ummc";
450 regulator-min-microvolt = <950000>;
451 regulator-max-microvolt = <3000000>;
452 regulator-always-on;
453 regulator-boot-on;
462 samsung,color-space = <0>;
463 samsung,dynamic-range = <0>;
464 samsung,ycbcr-coeff = <0>;
465 samsung,color-depth = <1>;
466 samsung,link-rate = <0x0a>;
467 samsung,lane-count = <1>;
468 samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
473 remote-endpoint = <&bridge_in>;
481 samsung,i2c-sda-delay = <100>;
482 samsung,i2c-max-bus-freq = <378000>;
487 samsung,i2c-sda-delay = <100>;
488 samsung,i2c-max-bus-freq = <66000>;
493 samsung,i2c-sda-delay = <100>;
494 samsung,i2c-max-bus-freq = <66000>;
499 samsung,i2c-sda-delay = <100>;
500 samsung,i2c-max-bus-freq = <66000>;
501 clock-frequency = <66000>;
503 cros_ec: embedded-controller {
504 compatible = "google,cros-ec-i2c";
507 interrupt-parent = <&gpx1>;
508 wakeup-source;
509 u-boot,i2c-offset-len = <0>;
510 ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
511 cros_ec_ldo_tunnel: cros-ec-ldo-tunnel {
512 compatible = "google,cros-ec-ldo-tunnel";
513 #address-cells = <1>;
514 #size-cells = <0>;
515 power-regulator {
521 ti,enable-ext-control;
524 ti,enable-ext-control;
527 ti,enable-ext-control;
530 regulator-name = "vcd_led";
531 ti,overcurrent-wait = <3>;
534 regulator-name = "video_mid";
535 regulator-always-on;
536 ti,overcurrent-wait = <3>;
539 regulator-name = "wwan_r";
540 regulator-always-on;
541 ti,overcurrent-wait = <3>;
544 regulator-name = "sdcard";
545 ti,overcurrent-wait = <3>;
548 regulator-name = "camout";
549 regulator-always-on;
550 ti,overcurrent-wait = <3>;
553 regulator-name = "lcd_vdd";
554 ti,overcurrent-wait = <3>;
557 regulator-name = "video_mid_1a";
558 regulator-always-on;
559 ti,overcurrent-wait = <3>;
573 samsung,i2c-sda-delay = <100>;
574 samsung,i2c-max-bus-freq = <66000>;
579 samsung,i2c-sda-delay = <100>;
580 samsung,i2c-max-bus-freq = <66000>;
582 ps8622-bridge@8 {
585 sleep-gpios = <&gpc3 6 GPIO_ACTIVE_LOW>;
586 reset-gpios = <&gpc3 1 GPIO_ACTIVE_LOW>;
587 hotplug-gpios = <&gpc3 0 GPIO_ACTIVE_HIGH>;
588 power-supply = <&ldo6_reg>;
613 0x04 0x7a 0xfd /* [7:5] DCO_FTRNG=+-40% */
619 0x04 0xc1 0x92 /* Gitune=-37% */
625 /* [7:6] Right-bar GPIO output strength is 8mA */
645 * 04h Adjust VTotal tolerance to fix the 30Hz no-
669 * Set LVDS output as 6bit-VESA mapping, single LVDS
674 /* Set SSC enabled and +/-1% central spreading */
677 0x04 0x54 0x14 /* LC -> RCO */
682 remote-endpoint = <&panel_in>;
688 remote-endpoint = <&dp_out>;
697 #sound-dai-cells = <1>;
701 #include "cros-ec-keyboard.dtsi"