arm/dts/da850-lcdk.dts

6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
12 	model = "DA850/AM1808/OMAP-L138 LCDK";
13 	compatible = "ti,da850-lcdk", "ti,da850";
21 		stdout-path = "serial2:115200n8";
29 	reserved-memory {
30 		#address-cells = <1>;
31 		#size-cells = <1>;
34 		dsp_memory_region: dsp-memory@c3000000 {
35 			compatible = "shared-dma-pool";
43 		compatible = "simple-audio-card";
44 		simple-audio-card,name = "DA850/OMAP-L138 LCDK";
45 		simple-audio-card,widgets =
48 		simple-audio-card,routing =
53 		simple-audio-card,format = "dsp_b";
54 		simple-audio-card,bitclock-master = <&link0_codec>;
55 		simple-audio-card,frame-master = <&link0_codec>;
56 		simple-audio-card,bitclock-inversion;
58 		simple-audio-card,cpu {
59 			sound-dai = <&mcasp0>;
60 			system-clock-frequency = <24576000>;
63 		link0_codec: simple-audio-card,codec {
64 			sound-dai = <&tlv320aic3106>;
65 			system-clock-frequency = <24576000>;
69 	gpio-keys {
70 		compatible = "gpio-keys";
86 	vga-bridge {
88 		#address-cells = <1>;
89 		#size-cells = <0>;
92 			#address-cells = <1>;
93 			#size-cells = <0>;
99 					remote-endpoint = <&lcdc_out_vga>;
107 					remote-endpoint = <&vga_con_in>;
114 		compatible = "vga-connector";
116 		ddc-i2c-bus = <&i2c0>;
120 				remote-endpoint = <&vga_bridge_out>;
127 	clock-frequency = <24000000>;
134 		pinctrl-single,bits = <
143 		pinctrl-single,bits = <
165 	pinctrl-names = "default";
166 	pinctrl-0 = <&serial2_rxtx_pins>;
184 	clock-frequency = <100000000>;
192 	pinctrl-names = "default";
193 	pinctrl-0 = <&mdio_pins>;
199 	pinctrl-names = "default";
200 	pinctrl-0 = <&mii_pins>;
205 	max-frequency = <50000000>;
206 	bus-width = <4>;
207 	pinctrl-names = "default";
208 	pinctrl-0 = <&mmc0_pins>;
209 	cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
214 	pinctrl-names = "default";
215 	pinctrl-0 = <&i2c0_pins>;
216 	clock-frequency = <100000>;
220 		#sound-dai-cells = <0>;
228 	#sound-dai-cells = <0>;
229 	pinctrl-names = "default";
230 	pinctrl-0 = <&mcasp0_pins>;
233 	op-mode = <0>;   /* DAVINCI_MCASP_IIS_MODE */
234 	tdm-slots = <2>;
235 	serial-dir = <   /* 0: INACTIVE, 1: TX, 2: RX */
241 	tx-num-evt = <32>;
242 	rx-num-evt = <32>;
258 	pinctrl-names = "default";
259 	pinctrl-0 = <&nand_pins>;
262 		#address-cells = <2>;
263 		#size-cells = <1>;
264 		clock-ranges;
267 		ti,cs-chipselect = <3>;
270 			compatible = "ti,davinci-nand";
271 			#address-cells = <1>;
272 			#size-cells = <1>;
276 			ti,davinci-chipselect = <1>;
277 			ti,davinci-mask-ale = <0>;
278 			ti,davinci-mask-cle = <0>;
279 			ti,davinci-mask-chipsel = <0>;
281 			ti,davinci-nand-buswidth = <16>;
282 			ti,davinci-ecc-mode = "hw";
283 			ti,davinci-ecc-bits = <4>;
284 			ti,davinci-nand-use-bbt;
287 			 * The OMAP-L132/L138 Bootloader doc SPRAB41E reads:
297 				compatible = "fixed-partitions";
298 				#address-cells = <1>;
299 				#size-cells = <1>;
302 					label = "u-boot env";
307 					label = "u-boot";
329 	pinctrl-names = "default";
330 	pinctrl-0 = <&lcd_pins>;
334 			remote-endpoint = <&vga_bridge_in>;
340 	pinctrl-names = "default";
341 	pinctrl-0 = <&vpif_capture_pins>;
346 	memory-region = <&dsp_memory_region>;