Lines Matching +full:adc +full:- +full:ts +full:- +full:wires
2 * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
4 * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
8 /dts-v1/;
17 stdout-path = "serial0:115200n8";
18 u-boot,dm-pre-reloc;
27 clock-frequency = <32768>;
31 clock-frequency = <12000000>;
41 bits-per-pixel = <16>;
42 atmel,lcdcon-backlight;
45 atmel,guard-time = <1>;
46 atmel,lcd-wiring-mode = "RGB";
48 display-timings {
49 native-mode = <&timing0>;
51 clock-frequency = <4965000>;
54 hback-porch = <1>;
55 hfront-porch = <33>;
56 vback-porch = <1>;
57 vfront-porch = <0>;
58 hsync-len = <5>;
59 vsync-len = <1>;
60 hsync-active = <1>;
61 vsync-active = <1>;
68 nand-bus-width = <8>;
69 nand-ecc-mode = "soft";
70 nand-on-flash-bbt = <1>;
106 pinctrl-0 = <
114 bus-width = <4>;
115 cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
120 pinctrl-0 = <
127 adc0: adc@fffd0000 {
128 pinctrl-names = "default";
129 pinctrl-0 = <
137 atmel,adc-ts-wires = <4>;
142 atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>;
148 cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
151 spi-max-frequency = <15000000>;
159 pinctrl-names = "default";
160 pinctrl-0 = <&pinctrl_pwm0_pwm1_2>,
165 u-boot,dm-pre-reloc;
171 pinctrl_board_mmc0: mmc0-board {
189 compatible = "pwm-leds";
194 max-brightness = <255>;
200 max-brightness = <255>;
205 compatible = "gpio-leds";
210 linux,default-trigger = "heartbeat";
215 compatible = "gpio-keys";
221 wakeup-source;
228 wakeup-source;
232 i2c-gpio-0 {
236 i2c-gpio-1 {